Compressed Air System

[Freestyle]

My compressed air system is not charging when I run the engine. After shut down air blows out of the relief valve. My best guess is I should replace teh relief valve and see what happens. But before going with my guess I thought I would see if anyone here has a better idea.

Thanks in advance.

Bruce

Freestsyle
1986 67 CPMY
Tampa

 

[Glory]

Yes replace it, remove the valve you should be able to get it and any truck parts supplier and most NAPAs.

JM

 

[luckydave215]

And if it turns out the engine mounted compressor is dead throw it overboard, install a blanking plate where it used to be, and install a cheap 110V compressor in it's place.
Now you have "shop air" anytime.

 

[dottieshusband]

If you have the same gear driven, water cooled, compressor on the back of yours, as I've got on mine, get ready for a shock on replacement cost. I gotta think somebody rebuilds those, or there is a rebuild kit.

 

[Glory]

And if it turns out the engine mounted compressor is dead throw it overboard, install a blanking plate where it used to be, and install a cheap 110V compressor in it's place.
Now you have "shop air" anytime.

Unless he has Gyro-Gale stabs.?

JM

 

[Glory]

If you have the same gear driven, water cooled, compressor on the back of yours, as I've got on mine, get ready for a shock on replacement cost. I gotta think somebody rebuilds those, or there is a rebuild kit.

They are, OEM hatteras, a Bendix. Midland makes the same models. You can see a chart at http://www.bepco.biz/Catalogs/AirBrakeCat/24.pdf to figure the size and with the engine model you will be able to get a reman at most truck parts suppliers.

JM

 

[dottieshusband]

Thanks for the source! I thought the compressor was originally to run the air brake system on trucks and busses.. The air horn on a Hatteras seemed a bit of an over kill for that size compressor. I had seen a replacement on Diesel Pro or the like for 3K! Hopefully mine will keep on truckin for a long time.