Aligning port/stb Morse controls?

[Rickysa]

Full Disclosure: I need to work on my docking skills (or lack thereof )

Practice, practice, practice...I know and am doing as much as I can...however, I find myself not knowing where I am gear-wise at slow idle while backing in/positioning in the slip. my right and left hands are no where near even when in the same gear, and looking for prop wash to see if the gear is pushing forward/aft/none doesn't happen quick enough for comfort.

Is adjusting the cables on the controls a pretty straight forward job?

 

[rob71]

If you just need the handles aligned, loosen the set screws and pull the handle off.
Then reinstall on the splined shaft where it needs to be to match the other control.
Capt. Rob