AirSeps

[Northcott]

I have Walker AirSeps and the small hoses that comes off the main housing leading to the small filter are all collapsing in the "turn". Im not sure how much airflow needs to move through here. Do I need to order the "elbow hose" from Walker?

Also, I know how to clean the main cones... Is there anything else I should be doing as far as routine maint.?

Thanks again for the help! I just chnaged my oil for the first time in the Gen, Engines and Trannys. the cost was 310.00 instead of paying $1,000 to have it done! Plus I enjoyed it...

 

[Xmeter]

Make sure your small filters are mounted straight up and down and not on an angle.
The mount that the small filter is on has a valve in it. I clean it when I do the filters.
When I replaced my hoses I could not see anything special about them at all so I used hoses designed for cooling systems.
I check them each time I clean the filters and they seem fine after 3 years of use.