AirPax dual 3 pole breaker with slide lock-out PN 27039

[Captain Ralph]

AirPax dual 3 pole breaker with slide lock-out.
Brand new. Not used. On back-order for 4 months.

This is Sam’s part number 27039.
http://parts.samsmarine.com/PartSearch/LinkPart.cfm?ItemNmbr=27039

Sam’s was out of them, I had to fill a minimum order of 3.
We used 2 on Wills Hatt (MY65).
This will also replace the Heinemann breakers with the See/Saw lever breaker lock-out similar to Sam’s 75718, 26970 and others.
Gen-set to the left breaker set (80A), Shore power to the right breaker set (60A).

I have recently found another new breaker set so if you need 2, let me know so I can grab it before it is out of my reach.

$800 plus shipping.

PM for any questions.
Thanks for looking
,Ralph

 

[Captain Ralph]

This was sold.
I do have used HATT power breakers if anybody need one.

 

[SKYCHENEY]

Do you happen to have any of the 20A (?) GFI dual slot ones? One is the breaker and one is the "sensor"...

DAN

Dan,
Last I knew Sam's was recommending a "work around" for one of those by using a standard 20A breaker and running it to a 20A GFI and then on to the rest of that circuit. Most who did this mounted a GFI close to the panel.


https://www.lowes.com/pd/Eaton-Whit...V1CqtBh1UBQNKEAsYBSABEgIYWPD_BwE&gclsrc=aw.ds

 

[Captain Ralph]

Just the the power select 3p breakers.