Airpax breaker issue

[northshoreone]

Hot water heater on my Bertram worked fine going into storage now heater not working. Breaker has 240 to it but when turned on drops to 0 on the back side. If I unhook wires at heater I’m only reading 89 volt at the wires at the heater no old in hooked. IMput please from the electrical wizards out there. If it’s the breaker...source?Thanks

 

[northshoreone]

From their web site it looks like model IAG 217

 

[MadHatter53]

Check for voltage both sides of breaker. If your bad on load side of breaker pull,off the wiring and retest. You could have a bad breaker or bad wiring to the heater. BTW why are you heating hot water ??

 

[northshoreone]

It’s still brisk in Cheboygan MI!!It was a bad breaker after further investigation. The marina had the breaker on the shelf!!! I should buy a lotto ticket!!! Better to be lucky than good!!!Working perfect now! Thanks

 

[northshoreone]

It’s still brisk in Cheboygan MI!!It was a bad breaker after further investigation. The marina had the breaker on the shelf!!! I should buy a lotto ticket!!! Better to be lucky than good!!!Working perfect now! Thanks