Afromosia Wood Plugs?

[MVCaprice]

Does anyone have a source for 3/8" Afromosia Wood Plugs? I have been working on redoing the counter top in the pilot house and need to replug the trim afterwards.

 

[Scarlett]

If you have a piece of the trim left over, get a plug cutter and cut your own plugs. If you do not have a drill press, they make cutters with a pointed guide that you can use in a hand drill. John

 

[MVCaprice]

Unfortunately I am going to reuse the trim and i don't have any Afromosia wood, although i suppose i could look for that instead.

 

[GJH]

This where I used to get it. http://www.atlanticveneer.com/AV__Mill_Contacts copy.htm

You could ask the guys at Sam's where else they recommend. There's Wood Chip in Ft Lauderdale that used to have it too.

http://woodchiplumber.com/

 

[jim rosenthal]

Exotic Lumber in Annapolis has some afromosia lumber. Try them. It turns over very slowly, they probably still have it.

 

[SKYCHENEY]

Teak plugs are a close match. You won't know the difference.

 

[MVCaprice]

I found some afromosia lumber on eBay for gun stocks and a 3/8” plug tool. I’ll post up pics.