871 Transmission Mount

[wndsr]

I am looking for Transmission mounts. We have talked to Sams and they know what I need but dont have any avail at this time. If you go to his parts list and look at part number 5130234, that is what the mount looks like-but that mount is for a 4-53 Detroit.
Thanks

 

[mike]

Replaced all orig. DD mounts on both P&S 871's with PYI units. Had to make new trans and eng brackets from 3/4" angle iron. It's a big job, but worth it if you plan on keeping the boat. An alternative is to cross drill your orig. mounts and through-bolt. You will lose the vibration isolation, however your mount will not sag and you will be able to maintain alignment. If you’re interested I will send you some pics. via e-mail. My files are too large to post. Good luck, mike