12 point monitor Aux?

[MVCaprice]

Does anyone Know what the Aux alarm light means with regards to the 12 point monitor? It seems to be happening with both the ignition on and off at the moment.

 

[Briankinley2004]

Is that generator power?

 

[MVCaprice]

Is that generator power?

Not that I am aware of. First time we have ever seen it!

 

[SEVEN]

Each time my light and alarm comes on is because I popped a breaker. Once turned back on the light and alarm goes out. Not sure this is the same problem you’re having but good luck.

 

[scottinsydney]

I cant remember what the AUX is for, but you may find that the small integrated circuit relay for it on the right hand side of your systems monitor circuit board needs to be wiggled. Or possibly a resistor needs replacing. The correct resistor/relay is determined by looking at the far left text on the board edge.

Google Hatteras System Monitor for Les Henderson in Florida who repairs these panels.

 

[MVCaprice]

I cant remember what the AUX is for, but you may find that the small integrated circuit relay for it on the right hand side of your systems monitor circuit board needs to be wiggled. Or possibly a resistor needs replacing. The correct resistor/relay is determined by looking at the far left text on the board edge.

Google Hatteras System Monitor for Les Henderson in Florida who repairs these panels.

So we were on the hook when this happened and on gen power but have had been to a series of low power docks which seems like we may have introduced some power related issues. There are not obvious other symptoms which seems strange. I will need to check into the breakers and look at the schematics to identify what it actually means.

I agree that is seems likely that it may be something on the board itself and will investigate that.

 

[MVCaprice]

Solved:

When the engines were on all lights were lit up. Turns out that one of the kids on board likely had pushed in the test button on the bridge panel and it got stuck in which set it in test mode illuminating the error circuit lights but not the alarm sound.

 

[rwetherington]

The Aux light is for any extra that an owner might want to monitor on the yacht. Look at the brain board and if there is a jumper between the two terminals there is not anything extra been added to the system. if that is the case you need to change the dip relay on the board. call Steve and he can sale you one. remember this is a closed loop system.