Need to see if anyone has ever replaced the wiper motors and the wipers on a 56 footer.
Need some recommendations on what they used
Have one out but nothing is visible so no numbers or nothing to compare it too.
Ok any thoughts would be appreciated.
We are having a problem with the generator not pulling fuel from the tank. Here is a list of the things we have done so far.
1. Changed the complete fuel filter system.
2. Replaced the fuel hose from the tank all the way to the fuel filter
3. Added a...
Onan generator has an issue
E with main fuel filter blowing bubbles then when the fuel runs down stops running.
Used a rebuilt filter kit didn’t help.
Any suggestions
It runs fine until it runs out of fuel I the filter.
Have a 20kw onan. Started up great. Running great. Went to transfer power over to the generator and noticed that the voltage on the meter was showing less than. 100 volts lights and everything came on but worries that I'm not getting appropriate voltage. Any suggestions before I start buying parts.
A new problem! The ac/heat recycling pump has started to come on and off as if there is a ac unit on, but none of the units have been turned on. Anyone have a solution on what to start looking for. At a loss. In Kentucky lake area and not sure how confident someone might understand the workings...
Have a 56 ft. Have been researching a thought about closing in the aft deck with windows that hinge up. Can't figure out if I can fabricate them myself or should try and buy them for a custom fit.
Anyone done this. I would appreciate any thoughts on how and tips on how to get it done. Living...
Just finished the galley dinette area. I custom built the cabinets and added granite countertops. Love the new look. We needed more storage for everything that one has to try and find room for. Pans in the oven etc.
Has anyone ever removed the dinette area and replaced it with extra storage cabinets and a nice granite counter top. We never eat at the table and I really could use the extra storage for pots, pans, etc. Planning on doing this soon. We totally re-did the galley side with new cabinets and...
Our 56 Hatt has M20 Transmissions and are due for an oil change. What is the correct procedure for removing the oil and cannister filter. I would also like to replace the older style cannister filter with the spin on adapter and filter that is now available. Any advice would be greatly...
I have a 56' and several months ago I posted a question regarding why I could not get power to the middle set of breakers. I have replaced all the fuses and they wasn't the problem. I have now narrowed the problem down to the breaker itself. I talked with Ed today at Sam's in Fort Lauderdale...
Ok, I have looked on all the forums and can't find a solution for my problem, so I am going to ask the pros. I have 2 240 power cords coming into the boat. They both show power coming in on the meters. The problem is when I move the switch over to the second cord I don't get any power to...
I'm considering either having our 8V92 engine valve covers chromed, or replacing them with new stock chromed covers; if available. Any suggestions or vendor sources that might still carry the chromed covers?
Enjoy your holidays with family and friends!
I have three (3) hatteras doors that we took off on a remodel on our aft staterooms and wonder if anyone would be interested in them. They are curently in St. Louis, MO but I may have a way to have get to Fort Lauderdale if anyone would be interested in them. They are in great shape. One is a...
Does anyone know of a source that I can get a spin on secondary fuel filter plus the brackets for DD 8v92's. This is to replace the old canister type that is on the engines.
I have noticed in some of the yacht magazines lately that a lot of Yachts are using a type of v groove ceiling boards instead of your traditional cloth fabric and I have tried to find out what type of product that they are installing with no luck. Anyone have any suggestions I would greatly...
I have a 20 kw Onan generator on a 56' that I am about to loose my mind over. We have done the following: Replaced the computer board, replaced the water pump, took it apart and and checked the head and replaced the head gasket. Found that the water intake hose was to small and had them...
Never Give The Ship. We Just Completed A Non-scientific Test By Running Three Of The Smaller Ac Units To See If We Would Over Heat. After 45 Minutes Of Running Time We Experienced No Overheating Problems. At This Point We Shut Off The Three And Ran Only The Main Salon Ac, After 22 Minutes-...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.