Search results

Hello, I am looking for a source for the extra large vent clam shells (plastic) that are on a 48 CPMY. They are 9" long with opening of 8" and the 6" or so. I see Beckson makes an extra large, but it is not quite it and I want to match the other side's vent if possible. Is there another source...

I am looking for a fin stabilizer system for my 1995 48 CPMY. Something used that is fully functional and in decent shape. I guess it would be off a boat going to a gyro or salvage. My boat does not and never had stabilizers - so this would be a retrofit. This is a long-term search to find the...

Hi all, I have three cruiseair split systems on my 48 CPMY II. I came to the boat today and it was hot, well over 100 degrees inside and all three units were running showing displays with 100+ degrees. No water was pumping out of the AC raw water discharge and the pump was running. It was so...

A look at both sides of the internals...

Hi, I am looking for any experience with rebuilding the original Alpex Italian horns. Mine are originals on my 1995 48 CPMY. I know I can get new horns - but these are already fitted to my boat and I hate just to chuck em and have to make new holes in my boat and refit etc. The compressors are...

Hi all, I am going to rebuild my AC raw water intake manifold. The original bronze developed a leak and was replaced with PVC sch 40 with glued fittings which I don't trust. What I've read sch 80 threaded fittings would be the minimum. I am thinking avoiding plastic altogether and going back to...

Hello - I am the proud new owner of a set of Marquipt 6 step stairs. I have two brackets but need an additional 2 brackets and the two push pins w/cables that the stairs use to attach to the brackets. I don't know why the stairs came without pins... I need the "normal" brackets - not the flush...

Hi all, I am missing the AC and DC wiring schematics/diagrams for our 1995 48 CPMY. Does anyone have them electronic or a spare copy? Trying to chase down a number of electric gremlins and the diagrams certainly would help a great deal. Thanks much!

Hello, I am looking for a 6 step in good shape. I was looking forever for a 7 step but now after doing more measurements a 6 step will work better. I also need clips x 4. Please let me know. Shipping to NW Florida 32461

Hi all, I have a dilemma. My 1995 48 CPMY is leaking badly when filling up the keel tank at the fuel fill hose. At full pump pressure it creates a curtain of fuel against the rear wall of the ER. Of course this is dangerous as hell and quite a mess. So, I requested the hose to be replaced...

I'm sure oil topic has been beat to death but since we are here ... I have 6v92's and as a newbie am looking to do my 1st oil change so... to my limited understanding a low ash content is a key oil consideration for DD 2 strokes with 1.0 as the upper limit. One reason to use Delo 100 is that it...

Hi all, Back in the hunt for a 7 step stair unit. Due to the dimensions of my boat and dock height/finger width I must have a 7 step unit - 6 is too short and 8 is too long. If you have one that needs a good home - please let me know. Thanks!

Hi All, I know there have been threads on replacing scoop style engine intakes with the rectangular wedge screen style. My question is what size screens should I get for a 1995 48' CPMY 6V92TA? Any recommended brand? I have been looking at the Buck Algonquin site and there is a 3" and 4". The...

Hello all, I have a set of ladder receivers w/pins on port/sb as well as in my cockpit for stowage. Factory? Can anyone ID what brand this ladder might be from the photo? I have been looking at Marquipt stairs but they won't work well my narrow dock finger so I thought I'd try to find the...

Hi all, I know this is a long shot but I am missing the chrome trim ring around one of my round blue LED courtesy lights. Here is the photo. I have the larger trim piece but missing the "inner" trim ring which covers the black plastic ring of the light where the screw holes are. Thanks so much...

Looking for service manuals (which include rebuild info) for DD 92 series (have 6V92 Turbos) and Twin disc MG5111.<br><br>Either CD or paper will work.<br><br>Thanks!<br><br>

Hi All, I am looking for a SIMRAD AP22 display/control head. My LCD is badly faded and I'm looking for something clean VGC if possible. I've seen on ebay but are usually pretty beat up. Thanks. Formosa

Hello - my e120 screen is completely dark after it boots, although it shows graphics during the boot up (strange). Looking for one in good condition. Willing to partial swap back mine for parts.

Hello - my e120 screen is completely dark after it boots. Looking for one in good condition.

Hello, Looking for a set of boarding stairs/steps for our 1995 48 CMY. 6 or 7 step will work. Teak would be a bonus but metal would work fine. Right now can't find anything unless ordering new from Marquipt. Thanks!