I have a pair of 5 blade props that came off a 48' my Hatteras,
I think it was a 1981 but could be wrong on year.
The stamps on the wheels read 36x36LH N759 F&J (or maybe F8cJ?) and 36X36RH N759 F&J
One end of each shaft measures 2-1/16"; the other wide end of each shaft measures 2-5/16"
They...
the center line is removed an having new made - the main helm wheel will not work of course the line is off at fly bridge ?if i cap off block an line bleed sysytem will lower helm come back or is a waste of time. 43' dc with 671 naturals
the port side 671 natural is wanting to die at normal idle .normal is 500-600 is normal . if i move to700 -800 rpm dying issue subsides .could this filter related or is ther e adjustment nuts on throttle linkinge any thoughts are apperciated thanks
i have 1979 43' dc ,does the fuel for the generator come from the tank that is feeding the engines or is one tank dedicated to generator right now running on keel any info would be appercited thanks
I put new impeller in starboard engine with that said I'm not getting any water to strainer or impeller,
took off first two water pipes off forward of impeller first an second cleaned reinstalled, still the same.
Is there another impeller forward of the one in back...?
Would a bad thermostat...
Starboard one is weeping at top appears to be cracked ever slightly - wondering if anybody has ever had this happen.
Port side has stream of water coming out what appears to be a freezeplug hole. assume it can be re-plugged.
What would you use for the insert, is it a copper insert?
the boat is a...
is it ok to leave on or is necessary to turn off at breaker panel when away for extended periods of time the pump says automatic so it should trun its self on / off when demand is called upon . advice appercited
Generator won't turn off!! Hard to find part for cummins/onan stop solenoid for a 1979 43' double cabin Hatterasdiesel generator. (Part #307-1904). Fast help greatly appreciated!
push button on forward head to flush / trips breaker at panel -reset- back macerator 1/2 turn counter clockwise works motor bad can be changed out? or new head? any advice
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.