Search results

Having an issue with exhaust flow and looking for some suggestions. Starboard side exhaust water flow is steady but port side is just surging. That is, the exhaust gets very quiet for a few seconds. (like the engine has shut down), then surges a blast of water, then repeats the pattern. I...

I just installed an Acadian-rebuilt Hydreco on my 8V71 and cannot get the tach to work. It appears to me that the tach cable has been damaged and may be 1/4" or so shorter than it was previously (see attached pics). As a result, the tach angle adapter won't push in far enough to engage the...

Looking for a parts schematic for an Allison M20 transmission. In particular, I could use a diagram showing seals/gaskets. A link to Acadian that was posted on the HOF several years ago no longer works. Thanks in advance for any help.

Today we had our third experience not being able to connect to shore power in a marina with ‘upgraded’ electrical (i.e., NEC 2015 or newer). I won’t pretend to understand the problem but it’s apparently related to GFCI sensitivity at the dock pedestal. Whatever the explanation, we must have...

I don't recall this issue being discussed in detail on the forum, so I'll ask. Does anyone know of a way of converting a DD 8v71 from a block-mounted spin on oil filter to a remote filter, i.e. some part mounted on a bulkhead and connected to the engine with hoses? I ask myself this question...

I have been having sporadic problems with my Outback 3232 inverter/charger (32V) and was disappointed to learn from Outback that this unit has been discontinued. They do not have a replacement unit and repairs offered will be dependent upon the serial number (whatever that means). I'm not...

I have always used only 50 A shore power service. I can't tell from the owners manual whether the boat was designed for just 50A service, plugged into either port or starboard receptacles, or whether we could actually have 100A of service coming in to the boat by using shore power cables on...

Is there anyone on the HOF that has access to the "ABOS Marine Blue Book" (effective Jan 1)? I am specifically looking for the 2020 "low value" for a 1977 Hatteras 58' Yachtfish. Michael E Southern Comfort Chesapeake, VA

The Admiral has been after me for several years to separate the galley outlets so that they are on two separate circuits. So, my electrician and I started tracing wires last weekend and ran into a situation we cannot understand. There is a single cable from the breaker on the AC panel which...

I am considering converting the DC electrical on my 58YF from 32V to 24V. Anyone on the HOF like to offer any 'lessons learned' or other advise/opinion?? Also, there is a long DC terminal block on the forward bulkhead of my port engine room. I do not have a wiring diagram for this block and I...

I've had some conversations with friends recently about grounding of DC circuits on boats. Some of these guys are as clueless as me about electrical systems, but a few clearly know what they are talking about (I try to listen more to them!). The basic question is should my 12v, 24v and 32v...

I am looking for the inside trim pieces for both galley windows. Please e-mail me at hatteras58@oulook.com if you have these pieces and wish to sell them. Michael E Southern Comfort 1977 Hatteras 58 YF Currently in Norfolk, VA

A friend of ours has a dinghy and outboard for sale: 8 ft West Marine inflatable with rigid floor in Good condition 2-stroke, 4 hp Mercury outboard in Excellent condition (less than 10 hrs on engine). These have been stored in a garage, not on a boat. He hasn't given me a price so if you are...

I'm having the following air conditioner problems and would like to ask for some input from the HOF experts: 1. One of the salon units runs about 5 seconds and then trips the breaker (30A). This only happens in the AC mode, not the heat mode. I replaced the breaker but same problem. What...

I posted this note some time ago, but now lowering price to $50. Admiral says it's got to go, one way or another! - Hi-Lo Table, mechanism works fine but could use new Formica or other type of top - $100 (previous price) Not interested in shipping, so this probably only works for southbound...

I'm about 99% through a refurb of my air system (tank, hoses, regulator, etc.) and I noticed that a check valve on the larger hose from the compressor to the tank was destroyed (i.e. lose pieces inside). I don't think this check valve is an original Hatt part and I question whether it's even...

I'm having some problems with a worn out engine-powered air compressor and considering replacing it with a 110V compressor. I use the air primarily for the horns (dual classic Buell's). For those of you who have already made this conversion, I would appreciate any suggestions as to what size...

I'm considering relocating our Marquipt stair mounts from the hull to the top or side of the toe rail. I believe I've seen pictures of this config before but cannot locate them on the forum. Any help would be appreciated. Happy New Year! Southern Comfort, 1977 Hatteras 58YF Portsmouth, VA

Is this the boat? Southern Comfort 1977 Hatteras 58YF Portsmouth, VA

Whoops, let's try this again. More WF parts..... Happy New Year HOF friends!