Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Search results

  1. A

    Low RPM's; 6V92TA

    First time out with the boat and push the throttles up past 1000 RPM both engines hesitated and felt like they were going to stall out. Brought the throttles back to idle and recovered with no visible smoke or any other indications that would make me return to the slip. I proceeded to the fuel...
  2. A

    Cannot completly fill the fresh water tank

    I have a 85, 45ft. sportfish with a 165 gal fresh water tank. Recently trying to completly fill the tank, water it is some how leaking and filling up the bilge. I have checked the hoses etc and cannot find where the leak is. Could the tank be possibly cracked? When I'm filling up the tank at 1...
  3. A

    Mounting a inflatable on a 45C, 1985 series 11

    I'm about to install a cradle on the 45C for a 720 lb inflatable. I called Hatteras and found out that the forward deck is 11/16 thick. I have a concern that I have to remove the Vee berth headliner and add support to where the cadles will be mounted to insure that the forward deck can take the...
  4. A

    Center console inflatable for a 45 ft. Hatt

    Looking for suggestions as to what type/model/hp would be approperiate to have on the 45? Al
  5. A

    Stiff starboard throttle

    FYI-- Last week the starboard engine while the Gleendening was engaged kept loosing RPM's and I noticed the throttle movement became stiff. After getting the boat back to the slip I removed the cables at the bridge and at the engine side. Exercised the travel from both ends and they operated...
  6. A

    Installing a davit on a 45 ft SF

    I'm going to have a MarQuipt 800 lb. davit installed on the port side on the Hatt in a week or two. I checked the V berth closet(port side) and there wasn't any support and/or foundation as someone had mentioned that some of the Hatt's may have come from the factory in 85. I would appreciate any...
  7. A

    MHI tubo's on 6V92 TAC-2's

    I've have the MHI's P/N 49182-04100 on my engines and wondering if anyone has any specific problems with the Mitsubishi turbos? Bascially I inspect the units for bearing play, clean the vanes and look for any signs of distress. Any info will greatly be appreciated. Al
  8. A

    Mixing Delvac 1240 and Exxon XD3 2 cycle oils

    I've been using Delvac (Mobil) 1240 (6V92s) oil for five years and it is now becoming a problem to purchase it but it is available. Has anyone mixed XD3 with Delvac or using it in the DDA's? Any info will greatly be appreciated. Al
  9. A

    Getting the scraches out of the paneling?

    I just brought the 45C back north last weekend (7 to 9 ft.) and one of the pictures which I thought was pretty well secured to the wall did come loose. Any suggestions as to how and what to use and try and repair/blend it out before the Admrial arrives? I noticed Mike966 in his tread has the...
Back
Top Bottom