Search results

Can anybody recommend a private tour in Cuba? What’s the best way to get there from Miami?

Turning 65 this year and I bought a house. I can’t believe it’s been over 10 years. Thanks for all the friendships and problem solving.

I’d like to buy about 150 feet of good quality dimmable 120v warm white LED rope lighting with several connector kits to cut it to length. This would be for the valances in the salon and master state room, and outdoor lighting on the flybridge. Would the LED tape be better for the indoor...

Just noticed some water under the teak. Ideas?

I have a broken bolt on a port light. I assume the pin comes out with a punch? I don’t want to damage/destroy the port light. Anyone have a good source for the bolts?

My screen cups were perfectly clean but I was surprised they are mounted upside down. They are in the pick up line as I understand it so it seems that anything caught by the screen would fall back into the transmission when you break the seal. Am I missing something or is this a very strange design?

Both transmissions are running fine with about a two second delay after shifting, but the mechanical gauges only show about 100 psi in gear. My mechanic helped me change all the cables and adjusted to throw. We also checked the screens and they were perfectly clean. He recommends adding 1/2...

Before you order new cables, check the diameter not just the length. Sams thought mine were 33C but it turns out they are 43C (except for the short cable from the synchronizer to the Port engine. Here are the lengths: Bridge Helm Part# Length Port Gear 43C 26 Port...

I have 200-300 square feet that I won’t be using. It’s too much trouble to lay it out and measure. How about $200 plus shipping? If you measure it less than 200 feet, I’ll refund the shortage at $1 per foot

I plan to clean the transmission screens and change the oil. What have you done for replacement gaskets?

The 1.25” hose from the strainer to the pump runs over the shaft in the stbd ER. It’s never been a problem before but recently I noticed it had settled down and was resting on the shaft. IM GLAD I CAUGHT IT BEFORE THE HOSE FAILED. What is the proper fix? It doesn’t look like there is enough...

Starboard side has a slow fuel leak. I guess I’ll replace both. Anyone have a part number or source?

Am I crazy for even thinking about it? It’s 1/2” tempered glass.

It’s been years since I had tint installed. What’s the latest and greatest?

I have removed the thick interior caulk from my fixed aft deck windows (I have a fully enclosed aft deck). It was a rubbery product that stayed flexible for decades. Two questions: Should I install new window tint before or after the new caulk? What’s the best product? It’s a very thick...

It’s unseasonably warm here, probably 85 degrees air temp but the water is still cold, probably 50 degrees. The bottom half of the exhaust tubes are literally dripping with condensation. I never noticed that before.

It has been said suggested that the 24 V models will work on 32 V because of intermittent use. Has anyone actually tried it?

We have the 4 stateroom 4 head model. It’s a lot of small rooms with tiny showers and small beds for a 58. I’m thinking about converting the over/under bunk room to a new modern head and tearing out the original head to make room for a centerline queen. We would then have 3 staterooms and 3...

I have a couple of these that need replacement and am having trouble locating them.

Does anyone still make a small 500-800 gph pump in 32 volts?