Search results

My 89MY 65C has 3 1/2" shafts and Hatteras drawing calls for a "Lantern Ring" sandwiched between 3 sets of 1/2" packing. Does anyone have a part number or where to get these Lantern rings?

The midship bilge on my 89 MY 65 C is the lowest bilge on the boat and a small compartment. When the water gets to a certain level the switch drops killing the pump and the water in the line runs back into the bilge creating a sloshing motion which kicks the switch off and on causing the bilge...

May sound dumb but I can’t figure out how to remove covers in bathroom shower to get to the lightbulbs in a 89 Hatteras 65C. I’ve tried gently prying but I don’t want to break anything.

I am in search of a 24V Galley Maid Windlass motor for a 65' EB Sportfish. I checked with RAZ marine and they said they didn't have the armature or coil packs for the 24V and no motors in stock. Any suggestions?

Shortly after purchasing my boat the Halon system was accidently discharged by pulling release lever in closet in salon. I've since removed the tank and had it refilled but can't get the alarm to go off on the bridge. I've reset the system at the tank and also reset the switch on the red box...

I am looking for one Marine Rope Cutter (Spurs or equiv) for 3 1/2" shaft.

I purchased an 89 model 65' C with Factory Enclosed Bridge last July. The center glass on The EB had a crack in lower port corner and made arrangements to replace by a yard on the Gulf Coast experienced with this kind of work. Replacement made and all was well while other work resumed on the...