Search results

I am considering dumping the LaMarche Constavolt charger and replacing it with a smart charger so that I can switch to AGM batteries. Does anyone who has done this have any suggestions, or know of downsides? I assume having a constavolt charger lets the charger run 32 volt systems without...

The stop-solenoid on our NL generator stopped operating while the generator was in use. The solenoid works when I hook it up to a battery but it does not activate when I try to start the engine, nor when I press the warm-up button. I can get the generator to run by manually pulling the solenoid...

I am wondering what everyone is using as far as anchor size on their boats. We are updating from our current CQR to a Mantus M2. Mantus recommends a 125lb but the Galley Maid Windlass guys think I should go with a 105lb. I would prefer the lighter anchor in case I need to haul it up by hand if...

I am trying to remove my windlass, to repair or replace it. The capstan came right off, as well as the plate that holds the springs. However, the wildcat will not budge. Is there something I am missing? Is that I bushing on the shaft, or is it tapered?

My Northen Lights 20kw generator stopped working suddenly. I am almost certain it is a fuel starvation problem. I checked all the lines and there is no blockage. If I use the manual pump on the fuel pump, as if I were bleeding the system, the generator will run for a few minutes, then die. I...

My slip has a 50 amp connection and a 30 amp connection. I am using a 50amp-30amp adapter at the post. When I run the stove on the 50 amp line (line 1) it draws 10amps but if I run it on the 30 amp line (line 2) it draws 20 amps. What gives? In both cases it is sending 220 volts to the stove. Is...

When I turn the wheel at the lower helm one full rotation, the rudder turns 10 degrees. When I do the same thing at the upper helm it moves the rudder only 5 degrees. As a result, I am moving the wheel twice as much at the upper helm while under way. The air pressure is fine and the fluid...

Our Marquip 1000 Davit is leaking fluid. I cannot tell if it is a cylinder or a hose, and cannot find a manual to help me figure out how to repair it. Does anyone know of a repair shop near Philadelphia? I would consider taking it off the boat and driving it to a repair shop but do not have a...

The lower helm steering does absolutely nothing, just spins. The upper helm is fine and i can steer with the autopilot as well. It happened suddenly with no prior issues. At first I thought the autopilot was not disengaging but i turned it off and it did not help. I do not see any physical...

My 58MY was painted about 15 years ago, and overall, it looks very nice. However, there a dozen or so paint chips and some stress cracks here and there. Short of a new paint job, what do you guys recommend as a short term fix? My previous boat was gel coat, and repairing nicks and cracks was...

We just closed on our 1979 58MY! Is there a secret handshake we get to learn now?!:) After a few months of searching for a 53-58 on the east coast, we fell in love with a 58MY in Fort Lauderdale. It was previously known as "Roto-X", and more recently, "Seas The Moment." We plan to dock her in...

I am buying a boat in Florida that needs some work done at the yard (soda blast and bottom painting, and new shaft seals). I have been told by a surveyor that getting the work done in Florida would be less expensive then having it done closer to where I live, in New Jersey or Maryland. Does...

Hello everyone. I am new to the forum, and currently looking to purchase my first Hatteras. My wife and I fell in love with the yachts, particularly the 53 Classic, the first time aboard, back in 1998. It has been our dream to own one ever since, and we are finally at the point where we are...