Search results

I had no idea Boat US was a business based on ripping boaters and Insurance companies off. I am so over business that say we will bill your insurance company so you wont have to pay. WE ALL PAY FOR THIS!! I left my boat at a Marco Island Florida marina and flew to Maine for a 5 days over...

I just splashed my boat yesterday after weeks in the yard getting a new bottom job. Once she wqs back in the water, I happened to walk past the lift and saw about 10 inches of my new bottom paint stuck to the slings. not happy as that means I got no pint in a section or 2. Anything that can be...

For a while now I have been getting a drip on my valve cover on my starboard engine on the left hand side. It appears if oil is dripping out the front of the airbox and dripping onto the cover, and then dripping down. I have asked a couple of diesel mechanics about this, and no one seems to be...

My anchor chain is 7 yrs old to me. I have 200ft of 9/32 Grade 80 chain. It is looking rusty and my 1st thought is to reverse it around as the last 100ft has hardly ever been used. Is that a good idea, how long do they typically last? Should I just replace it?

I installed a new starter on my port engine on my 53MY with 8v71N. Went to start and nothing. After going over every possible senario we checked to oil dipstick and it was 2 inches higher thatn normal. I went to the oil transfer pump and pumped out some oil and the water, salt water. I drained...

We were leaving for a week trip today. Went to go start the motors and the port side is completely dead, not a sound when I turn the key. Went to test the voltage and have 34.5 at the starter. Terminals looked a little dirty so stripped that all down and cleaned them and put it back and went to...

I had my oil sampled back in March 22 and got a clean bill of health and it was recommended that I was good for another 80-100 hrs. So i went on a long trip. This was the feed back in March Well, hotdog! If this oil was really run 350 hours, these results are fantastic, especially since it...

I am doing some maintenance and painting on my 53 MY. These are rail ends that are used to support the aft deck overhang. I have searched the internet and can only see similar but not the same parts. These are old and nasty and would love some new shiny ones.

I have some airline cracks mostly under the deck, so on the ceiling of my adft deck. I thought it was probably due to the PO Boston whaler the had banged around. Also notice a few outside the side sliding doors. So the issue is what to do about them? Grind them out and fix. Sand and paint...

I have gone through so many threads and still cant find the answer I need. I have to haul out and the yard wants to know my exact weight to determine what travel lift to use. I thought this would be an easy find, apparently not. Any one got the answer? I know it depends on how much fuel water...

My oil samples came back and I have 5.7% fuel content in the oil. All my injectors were replaced just at my last oil change so i doubt it could be a leaking injector ( not ruling it out) I am not sure what to do or where it could be coming from. I looked at bunch of forums including the ones...

I am hoping that someone can save me from going crazy...... I had a bank of 32 v batteries going bad so as i decided before my trip they needed replacing (should be on a trip already and now stuck on the dock) Here is what happened that lead up to the problems. While installing the batteries...

So its summer in Florida and I can boil and egg by walking out doors.;) And my ac's are acting up so I had my ac guy over and he said there are 2 bad compressors and recommends I change out my old R22 split systems for new cruisair self contained units as the R22 are not worth fixing, the cost...

I have installed a new 6000w inverter in my boat. I am in the energy efficient home build business and was given an inverter that is good for off the grid type install and they said it would work well on my boat. I have it installed from the house bank with 8ft 0/2 cables with a ANL breaker...

Happy New Year My ongoing electrical saga continues. When my pedestal shorted out and polarity was reversed, my insurance company agreed with my electrician to switch every 32 house component to 12v as every 32 volt component was fried. We have now installed a 4x 6 volt golf cart...

Happy New Year Does anyone know or have the size of these cables, My look orogional and the markings are worn badly and cant read them. I need to change both out in my 1975 53MY

Has any one used them to start their motors? I recently had some issues with my 32 volt 8D's and a marine electrician that was doing some insurance work recommended I use 8 volt golf cart batteries to rebuild my port side batteries rather than replacing with the same 8d's. He said the...

My 53 has natural 871's. I am trying to get an accurate fuel burn so that when it comes to doing some up coming long range trips, I know what range I have. I am not going anywhere is a hurry and run about 1400rpm at about 8-9 knots. I have had fuel burn rates at 1.1 mpg, .95mpg , .8mpg and as...

My stairs got destroyed at the Tampa Convention Center Municipal docks, The slip they gave me was breaking apart as i was docked there. The top step through bolts sheared and my steps are no longer stable. I tried unsuccessfully to drill out the bolt. In old threads, I saw it was mentioned...

So the Mrs wanted all new systems installed and of course I lost the battle, so my old ones are going up for sale. The bases have had new balls and seals installed in the last year. The vacuum cylinders work, one needs a new pressure switch. The pumps , one is a 32volt the needs new duck...