Search results

We recently had a window crack and it needs replacement. What is the best way to replace a glass pane on the "Galley" windows? I got a quote from lookout glass for $2200 per side for as fixed windows and I was hoping to find a more cost effective fix for these windows such as just replacing the...

I recently was addressing a tank sensor level issue which required cleaning of the wema holding tank level sensor we have and found that the holding tank discharge pickup has corroded in our holding tank and is some number of inches above the bottom of the tank. Have any of you come across this...

Does anyone Know what the Aux alarm light means with regards to the 12 point monitor? It seems to be happening with both the ignition on and off at the moment.

I am seeing some very low consumption numbers on our Floscans and I would like to recalibate them. Do any of you have calibration data from the 5000/7000 series that you can share? I am looking for rough numbers on Idle adjustments as well as the overall adjustment. Here is a snap of our...

I was investigating a no flush issue with our forward head. I pulled it apart to drop in a new stator and was surprised to find the t bolt was completely detached and laying in front of the stator. Has anyone ever had this happen before? I was sort of shocked. It went back together just fine and...

Does anyone know what these door seals are and where i can get new ones from? I have found some similar "rope seal" at mcmaster carr but they don't seem to be an exact match. Also, Are these original? I am starting to wonder.....

KVH M7 RF6 Board - This is the RF board for the M7 Sattelite dish. Upgraded to RF7 and not longer need it. Cruisair 2 Nob Control plate and wiring. This was originally used with the Honeywell thermostat and has heat/cool/fan and fan speed knobs. Cruisair 1 Nob & 1 high low toggle switch...

Does anyone have experience with the CZone Signal Interface or frankly other CZone products? I am considering installing one to pickup all 6 tank senders we have onboard. It looks like I will need a pc interface to program it.

I have been piecing together a fuel polishing system. So far I have a Racor 1000 series, a Gulf Coast Filter F-1 and a 110v Oberdorfer pump and a 12 hour timer, lines and fittings. It should be a nice setup once its completed. One area which I am still trying to plan for is around the main tank...

I have a set of old style stainless Hatteras logos that were laser cut from stainless by Dix Metals. They are a 1/4" thick and are made from 316 Stainless. I welded stainless studs on the back which can be used to install them or you can grind them off if preferred and surface mount them. They...

I have a few questions on main engine accessory drive belts. The belts on the mains were shedding a tad so I am replacing them before the boat heads north for the summer. Also, I am not sure that the previous owner used the right belts so i am looking into better solutions and possible upgrades...

Has anyone tried a dish network receiver other than the 211 with a KVH m5/m7? I want pause and Dvr functionality onboard. I have heard that the 211 can support a hard drive with some of that functionality but haven’t tried that yet.

I thought I already posted on this some time ago but couldn't find it. Sorry if this is a dupe. I am trying to understand what my options are for getting a quieter 24000BTU variable speed fan/air handler in the Salon. We currently have a two speed motor which I recently converted from a two...

Recently I had the heat exchangers out of our 12v71's for cleaning. When I put the HE's back in I changed the glands, orings and all gaskets. After running a bit i started to see salt weeping coming through the orings and glands on the HE discharge side on the port engine at higher rpm. In...

Has anyone had success with buying premade tranny cooler lines? The last time i had to get some hydraulic lines made locally it was close to 2k. I am hoping to fine some lines for our dual cooler / MG514 out of the box that are the right lines that aren't 30$ a foot overkill 5 layer hydraulic...

I have 75' of the black window trim: http://parts.samsmarine.com/PartSearch/LinkPart.cfm?ItemNmbr=58156 . It's a single uncut section. We ended up using urethane instead at the urging of a local shop. Make me an offer.

Does anyone have experience with AMI Membranes? I am looking at replacing our Sea Recovery membrane soon and was curious if anyone has used this brand. This is the specific one i need: https://www.wateranywhere.com/3-x-40-1200-gpd-seawater-ro-membrane-for-sea-recovery/

Does anyone have a source for 3/8" Afromosia Wood Plugs? I have been working on redoing the counter top in the pilot house and need to replug the trim afterwards.

Has anyone figured out the easiest way to clean out the HE on their Northern Lights 16-20k 844 based gensets? It looks like the HE is soldered into the exhaust manifold so it needs to be removed in one piece. The temps have been creeping up a bit and I want to give it a HCL/Oxacylic flush to...

Looking for 4 FX1 boards, control boxes and thermostats. If you have some and want to sell them PM me.