Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

Search results

  1. C

    903 heat exchanger”radiator” fitting for cap damaged.

    903 heat exchanger”radiator” fitting for cap damaged. It is cut all most completely off at the surface of the steel tank. Recommendations range from epoxy, silver solder or brazing. Everyone wants tank removed. Fifty year old bolt removals seems like a nightmare of problems. I’m thinking of...
  2. C

    Cummins 903 motor mounts

    Is there a way to buy or refurbish the mounts? The rubber has has been severely compacted.
  3. C

    Battery cables 4-0 seems like overkill

    My 48 year old battery cables are failing. I cannot find what the amperage draw on my Delco Remy starter is. The run from 8 D batteries to starter is about 12 feet. My mechanic feels like 4 0 is unnecessary and probably2 0 would suffice. Any info would be greatly appreciated
  4. C

    Wanted:bow pulpit for 42’ Hatteras

    Wanted:bow pulpit for 42’ Hatteras Pretty much any condition. I can make structural and appearance repairs
  5. C

    To many 8D batteries in 42 Hatt convertible?

    I have 2 8D batteries on port side for starting a 903 Cummins. Seems like over kill. The boat is only used when temperatures are above 60 degrees. Starboard side also has two but they are house batteries as well as for starting starboard motor. Any opinion?
  6. C

    Looking for a used pulpit for a 42c

    I am aware of the new ones from Shane. Hopefully someone knows about a pulpit that survived a boat disaster or was damaged and need repairs
  7. C

    How do I remove rudder bearing on 42' Hatt convertible

    I have removed the rudders. I cannot drive the bearing out from the top. The threaded piece for the tightening not covers the top of the bearing. Any ideas?
  8. C

    Cummins 903 air filter problem

    I currently have foam filters that fit around the filter cage but they are beginning to fall apart. The new ones ordered at a local Cummins dealer were in as poor shape as the ones I have. This leads me to believe they were old and are not being produced any more. Does anyone have an idea on...
  9. C

    Replacing a Capitol transmission with a Twin Disk???

    My Capitol transmission(somewhat rare counter rotating) on a Cummins 903 is beyond repair. I am considering a Twin Disk replacement. Has anyone done this and how did it work out?
  10. C

    Replace a Capitol transmission with a Twin Disk???

    My Capitol transmission(somewhat rare counter rotating)is beyond worth repairing. I am considering replacing it with a Twin Disk. Has anyone done this and how did it work out?
  11. C

    Need a Capitol Transmission

    I am looking for a counter rotating model#4HE10250 2:1 reduction. Please contact me with any info that may help in my search.
  12. C

    Gunnel Mats

    Has anyone found a suitable gunnel mat for 70`s version 42` Hatteras? Without the completely flat gunnel like a Ocean Yacht I am unsure about the traditionally found mats
  13. C

    Broke a Hynautic steering head spring

    There is a small spring that pushes against each of the metal balls in head. While screwing the cover back in I managed to ruin the spring. They look like the springs found in retractable ball point pens. I assume the strength of the spring is important in the operation of the balland seat. Any...
  14. C

    Replcement 903 engine mounts?

    Does anyone know where I can find the approximately 1/2" rubber bases for my 903s? They have been compressed over time and split horizontally. Alignment? uh oh
  15. C

    Location of CPL numbers on Cummins 903

    I am having a turbo repaired and the tech needs the engine CPL number. I have not been able to find it. Should be a four digit # or 3 numbers preceded by a zero. Any idea where to look?
  16. C

    903 Cummins turbo problem

    The gasket at the bracket is leaking exhaust into the engine room and the overall appearance of that half of the turbo a rusted mess. After I remove the turbo I need a place to take/send it for service or parts. Any ideas(especially in New England area)
  17. C

    Cummins VT903 thermostats are where?

    I have thermostats of indeterminate age but at over 10 years old . I was thinking that I should change them. Please tell me where they are. Early 1970s vintage.
  18. C

    Where are thermostats in 903VT engines.

    Since they are unknown years old I think should change them. please help
  19. C

    Pair of grab rails with pics

    I have a pr of grab rails in great condition.I THINK I have a picture attached. Make an offer
  20. C

    Wrap a round grab rails from 42'

    I have a pair in perfect condition. Make an offer. Will ship
Back
Top Bottom