Search results

Having past experiences with retrofitting Chilled Water systems in commercial construction, I know that insulating of pipe runs is absolutely critical and very difficult to do correctly. Given the "tightness" of boat installations coupled with associated vibration levels, I've shied away from...

I’ve gotten quotes to completely paint a 75’ MY from a few Fort Lauderdale yards, it was shocking! Given that the boat goes north in the summer, can anyone recommend a yard north of Florida to quote this project? Hopefully the quotes may be more reasonable…. Brett

I need to move my boat (75’ SDMY) from Spanish Wells, Bahamas to Norfolk in the beginning of July. Typically, my wife and I would do the trip via leisurely hopping up the east coast. This year, I’m contemplating Leaving wife ashore, getting some buds together plus hiring a mate in order to...

We are in Ft Lauderdale prepping for Bahamas trip. While doing systems check realized my fire suppression system is due for inspection. Can anyone recommend a vendor? Brett

To those of you familiar with cruising in the NE, I need a bit of advice. The boat is currently laying in Portland. Unfortunately, life reared it’s ugly head and is making it difficult For me to begin a southern migration. Should be able to clear all issues by late October and be available To...

We are currently in Annapolis, heading towards Maine. However, we plan on visiting NYC to visit our daughter the week after next. Given that we have a week to burn, can anyone make a few cruising suggestion around the upper Chesapeake (first time in area)? Brett

The generator is still giving me fits, history so far Ran for 5 day stretch 24/7, no issues. On final 30 minutes of day Five unit died. - Discovers large chunk of smutz clogging ball area of Racor. - Installed new kit in Racor. - New Racor filter - New secondary Onan fuel filter - Discoverd...

Can someone tell me who would sell a direct replacement fuel pump for Onan Generator in FLL? Part # 149-2331-01 I’d rather not re-plumb for a generic pump.

https://www.fisheries.noaa.gov/action/amendments-north-atlantic-right-whale-vessel-strike-reduction-rule?fbclid=IwAR0L8_4Oxd-86hH4yVbrxxWUd7YUohdfhkrEqpyWl7HiWkx4Y_cuOe18WHI

I was doing some routine Maint on my HVAC raw water system, while pulling a hose the SCH 80 PVC manifold assembly broke into two. Not being one to overthink issues….. I assembled new manifolds using 316 Stainless. Do I need to tie new assembly into The grounding system or protect w pencil...

My #1 Gen is a 21.5KW Onan that powers bow thruster via power take off on front of gen. Near the back end of the generator, mounted on a bulkhead is a large (approx 2’x2’) electrical box labeled “Bow Thruster Gen Unloading Contactor”. Can someone explain the function of the contactor?

I’m having an issue with CruiseAir split system, symptoms are (SMX Controls) - Thermostat Cooling light illuminated - Thermostat Cool light illuminated - Fan automatically cycles to high - Blower is operating - No codes on SMX - While in bilge next to compressor unit, I hear relays but unit...

My boat has a MMI-119 Central Alarm System. I’ve been getting an intermittent “Fwd Lower Level Fire” alarm along with enough noise to wake the dead. Fwd Lower Level corresponds to a forward bilge area with Generators, HVAC and Isolation Transformers. It “appears” that the alarm system sees...

3” Butyl Tape I’m planning on some touch-ups along my toe rail. As a function of this work I’ll be “lifting” sections of handrail/bowrail. Plan on re-bedding with use of butyl tape. Does anyone know where I can source 3” Butyl Tape? For those Of you who’ve been down this road, any warnings...

I've got a Simrad AP20 control head with a dead STBY/PWR button. The unit is otherwise in close to perfect condition. Is it possible to replace the button? Vendors? Parts sources?

What type of caulk should I use for various Beaty Beads around the boat? Where the house joins the deck near aft quarter (75 MY) is particularly vexing. Everything I’ve tried eventually becomes a mold/dirt magnet and requires constant maintenance. I’m about to re-caulk the fly bridge area, aft...

Unit short cycles for seconds, then quits; repeats a few times after short period, then I Hi PS code on SMX Display. (CruisAir FN7C-P) - confirmed water flow through unit (unit quits after few seconds, not typical of no/low water flow). - tried tapping on reversing valve. - other units on that...

Based on earlier positive feedback, I’m about to purchase a pair of the above mentioned boards. Hopefully, I’ll devise a way to rack the boards on aft upper deck near tender that won’t be too unsightly... For anyone currently using paddle boards, how do you store while underway or not in use...

I’ll be coming through FLL after returning from Bahamas in February, would like to find dock space for approx 3-4 months. Boat is a 75 CPMY, 18’6” beam and 6’ draft, any help would be greatly appreciated! Brett

I’m in the process of “attempting” to change the rollers on above referenced aluminum doors (2003 75 CPMY). Does came off easily enough, but now I’m stuck... Has anyone been through this exercise? It “appears” that the bottom rail of door will need to be removed; seems excessive for routine...