Search results

Anyone know where I can find a better looking replacement? I'm hoping for "new old stock" It measures 1 7/8" by 2 15/16".

I have one deck box on the bow of my 41 TC. It came with the boat when I bought it. It doesn't seem to have any markings as to who built it. I'd like to acquire another one to match. Does anyone recognize this box and perhaps know who built it and when I can get another one? Thanks in advance!

What is the acceptable compression test range for a 735 HP GM 8v92 - 1988 vintage? I have heard 400psi minimum, 435psi minimum and 450psi minimum. Which is correct?

My computer/tech challenged friend Dr Rosenthal asked me to post this photo of an item that he is seeking. If anyone has one or more of these that they would be willing to part with, please PM HOF member jim rosenthal.

A friend of mine is changing out the granite in his 1996 Hatt 74 Sportdeck. He has a granite table top from the dinette that needs a new home. It's 44" x 22" and 1 1/2" thick. It does not include the pedestal bases, just the top. It's free to a good home. Location is Annapolis. Contact: cutlas3...

It may not be too far off.

This looks ugly.... http://miami.cbslocal.com/2016/10/03/man-tries-to-steal-yacht-from-miami-beach-marina/

Should also fit a 41C of the same vintage. Its around 22" deep. Located Kent Island, Md. Make me an offer.

Survey sea trial today on a twin gas powered motoryacht. 454's fresh water cooled ran fine, no overheating on the IR gun, all temps normal EXCEPT: IR gun on the remote mounted oil filters shows oil temp at the spin-on filters is different port to stbd by 70-90 degrees. Port engine oil filter...

Not bad for a 50 year old. The boat, not me.

When you're standing in the engine room between the engines, is the water tank below there? There are two sections of 3/4" plywood, but what's under that? It's clearly not the bottom of the boat.

Many of us were attracted to our Hatteras yachts because of the beautiful wood interiors. My question is: On an otherwise extremely nice boat, how is the market value impacted by the interior being entirely covered with professionally applied white wall coverings and white paint finishes?

A friend of mine has a pair of 36x36 2 1/2" 4 blade used props for sale. They came with his 1991 52' Hatt CPMY as spares. He's tired of storing them and wants them gone. $1,000 for the pair. Located Kent Island, MD. PM me and I will send you his direct cell #.

I recently replaced the original 1966 Frigidaire refrigerator on my boat. Although it still worked OK, it was time for a more modern unit with a separate freezer and an icemaker. The old refrig had a single door which had a hook and eye setup installed by Hatteras in 1966 to keep it from opening...

One more from me:

My friend who's looking for a pair of props (see post in the parts wanted forum) has found a pair that may work but the bore is 2 1/2 instead of what he needs which is 2". The prop guy says he can add a nylon bushing to reduce the bore to 2". Has anyone had experience with this? Does it work ok...

A friend of mine is looking for a LH only or pair of 32"X39" 5 blade 2" bore props for his 1998 Hatt 39C. He already spoke to Steve at SAM's. They don't have any in stock. Anyone have a spare they'd like to sell?

2015 may be a Happy New Year for those of you wishing to sell nicely maintained older boats. It appears to me that in the last 3 to 4 months, buyers have been paying what would have recently been deemed "out of the book" prices for nicer boats. I guess folks have finally wised up to what it...

I will be replacing the original refrigerator on my boat in the next few weeks. Unfortunately, it will not come out of the boat in one piece. It's my understanding that the last owner "rebuilt" this thing at some point, which I believe included a new compressor. It's working fine, I just want a...

Here you go. BTW, this ad is from 1947.