Search results

I am looking for an individual to clean my hull. I've done it the last couple months but I don't have a breathing apparatus and the amount of time it takes to clean isn't making sense until I can get a Hookah. On a side note, if anyone has one they want to separate with please let me know.

I discovered a crack in the raw water elbow of both expansion tanks. Efforts to have them brazed have failed, it seems they are a brass over copper mixture. Brazing would be a temp fix regardless as there are several areas that are pitted around the Y fitting. Due to the severity of the...

I just serviced my port aftercoolers and noted a crack in this elbow. Upon inspection of the starboard side it has a pinhole leak so I’m in need of both

My forum search resulted in very few threads so I thought I’d ask. Has anyone found a 32v 2nm LED sidelight (other than Hella) to replace the OE Perko? My housings have finally succumb to vibration, UV etc. I assume if I decide to just do LED bulbs I can buy any incandescent housing and install...

A fishing forum I frequent has a webasto dealer located in West Palm Beach selling the following units @ $1000 each. They are brand new FCF series units. If anyone is interested in sellers contact info I will send by PM Digital thermostat, and wireless remote included Reverse Cycle Heat 2...

I’m looking for a cheap but expert Detroit mechanic. No I’m not, I know better. I’ve just relocated to Pompano Beach and I need a Detroit mechanic to help with a 12-71 that’s blowing black smoke. Only the port motor, bottom is clean, air seps cleanhttps://photos.app.goo.gl/CNgUpxfHJ5dykkr79

Anyone have an MHP-7101T starter they want to part with? It's the 24v CW rotation 10 tooth direct drive version. Looks to have been on 5/10/20 kw units

https://www.offthehookyachts.com/boat/1969/hatteras/36-convertible/2984/ She is SUPER CLEAN

I saw this on the Bahamas sportfishing facebook page URGENT ASSISTANCE NEEDED NEAR GREAT ABACO ISLAND, BAHAMAS. At 1710 hrs, 15 DEC 2019, the USCG Rescue Coordination Center (RCC) Miami, Florida has asked for assistance with a vessel in distress at location 25 57.994 N / 077 21.982 W or...

I had several qest fittings that were leaking so I chose to remove what was accessible and replace with schedule 40. It was an undertaking to say the least but 90% is complete. One thing that was inoperable when we purchased BEATs Therapy was the onboard freshwater system, there wasn't even...

depends which "tip" she prefers

I am looking for recommendations to install solar powered dock lights. I am torn on whether to install on the pylon tops or sides, convince me one way or another. Oh and for those residing in the sunshine state, I am happy to announce we closed on a new place in Pomano Beach, gotta jump when...

We have purchased a home in the gated island of Harbor Village in Pompano Beach and won't be bringing the boat south until after the first of the year so we're going to offer use of our dock. 2 miles from Hillsboro Inlet, 63 miles to the Bahamas and a few minutes to fishing, snorkeling or...

Garmin GMR x04 open array radar just quit, no warnings, error codes, it just quit. This unit is accompanied by a voltage convertor (10-32v to 36v)from Garmin with the GMR60x pedestal being a 36v unit. My GPSMAP 5212 MFD doesn't recognize the radar as it did prior. I have replaced the network...

I got tired of having to always have a flashlight to work around the ER so I replaced the (5) 48" double tube fluorescent's with (6) 48" 6500K LED bars. It's very difficult to show the difference but wow, totally worth the $65 and two hours spent to do the swap. One benefit to these is each...

My salon trigger went out so I switched the galley to the salon until I can order a couple more, sadly the standby I already had was "dead out of the box" I have (2) 115v and (2) 230v so either would be welcome.

I have a pair of ZF BW190´s behind two 12v-71 Detroits with Glendining mechanical controls. The port gear is slow to engage/respond, doesn't have the "pop" into gear. Symptoms started suddenly, pressure remains a steady 225 idle/250 under load., temp. oil is clean and topped off. I pulled the...

I just replaced the starter due to a bad bendix. First start with it sounded awful, grinding when flywheel was engaged and the belt squealed like a dying hyena. I replaced the old starter with the newer gear-reduction type. I considered that the rotation was wrong which would mean the old...

Why do I have to work for thirty minutes to figure out how to upload pictures on this forum? I still can't get them to post anyway but upside down:confused:

A nice duo slipped just down from me this weekend. Nevermind, I tried for thirty minutes to upload pics for f(*&&* sake :mad::mad::mad: