Search results

anyone have 32v pumps they want to separate from?

I finally got around to replacing the rotted battery shelf and need to reinstall my AC units. New units aren't in the budget unfortunately so I will have to reinstall the dometic R22 split units. I've been searching for a good deal on r22, found 18lbs for $150 but got beat to it...

Deka is no longer offering the 8v/195 so when you have one that's 2 years old and it explodes you'll have to replace the entire bank, what a crock of chit

there are many options to alter what the motor does, you could put/have switches on the bridge to operate it, it's a simple system. I, too need to do something now that my bowrail is gone. I free fall my system based on current and only have a foot control retrieve at the pulpit. with no rail...

Really?? Now? First day in Bimini, ZF gear won’t go in reverse Pull into BBG to find my port will not go into reverse. After pumping the shifter a couple times it would engage but I would have to hold it in place to stay in reverse. The synchronizer has been erratic as well. I hear it...

Bow rail was in rough shape so it went away, still have some glassing and a toe rail to paint. Recycled a couple of the long lengths

New in box 4800 series bone colored head with completely rebuilt gen 4 vacuum generator. Locking mechanism and electric flush included. $500. Located in pompano beach, will ship on owners dime. I also have a model 310 toilet that is rebuilt with a rebuilt pump I will throw in for this price...

Splashed after a month on the hard, ran two hours from palm beach to pompano. We are docked at our neighbors while our dock is finished. Tied up, connected shore power as usual then lost power completely a minute or two later. Tower breaker isn’t tripped, checked the shore power fuses that seem...

This is in an unmarked box, never seen anything like it (other than valve springs) on the vessel. Thoughts?

I have removed the factory bow rail after it was significantly bent on the port side. I want to repair the mounting areas on the toe rail and a few other small/moderate glass chips, then roll/tip. I have done research and feel like buying the $200 west epoxy kit (slow hardener)should get the...

Without knowing the hx of your boats bottom, other than there isn’t any existing blisters, if you are hauling to paint the bottom would you apply barrier coat?

I have leaking cooling elbow from corrosion. the only place that corroded was the splitter on both motors. Anyway, 4 welders haven’t been able to get an arc, any idea what material the elbow is so I can have replacement spiltters made?

I need to do a drive line inspection,freshen props, inspect shafts etc etc. I apparently have ignored my shaft seals and realized they don't look so healthy, no dripping, just don't look fresh to me. Looking for yard recommendations around pompano beach, Ft Lauderdale area. I'm literally 3...

I am upgrading my audio system and need advise on how much power draw requires an independent battery. I have a 55 Hatteras that runs on a 32v system but I have a separate 12v bank to run electronics on the bridge. It is an 8d CCA 1400, CA 1725 with a pro mariner charger. I also run a 20kw...

https://offerup.com/item/detail/323859309/

Spent the day fishing yesterday and discovered the galley fridge was hot to the touch, not "this feels warmer then normal" but you couldn't touch it for more than a second or two. The heat was coming from the edges where the freezer and fridge doors meet as well as the entire top. After the...

Does anyone know the owner of the former MY "Moonbeam" or "My Emeralds" I came across this and thought the present owner may be interested. I can pick it up and ship it if we can locate the owner and they want it https://offerup.com/item/detail/899378704/

I’m not looking fwd to this but I need some help The ER of my 55c has the (4) AC units mounted on a heavy steel shelf over the starboard batteries outboard of the engine. The 3/4” plywood floor the battery boxes and this shelf are mounted to is rotted and beginning to sag. I intend to make...

"Vinny" says it was removed from a LRC in Miami https://offerup.com/item/detail/894969031/

I am replacing a 32v livewell pump with a 12v. The wiring from the breaker box to a junction box by the old pump has a (+) , a(-), and a ground. I have a 12v bank that I ran a + and - from to the existing wiring at the 32v panel. I get 12v readings at the pump but it won't power up. I've...