Search results

Hello All I'm in the middle of cleaning the seawater coils on my Cruisair AC units I'm disconecting the hoses and circulating some mild acid through the coils ( Genisis Method) Which BTW works great safe and very efective. Anyway I noticed a small plastic tube inside the coils some have and...

I have 4 AC temp guages and 2 senders original OEM Hat all working when removed. Also 4 drive oil pressure guages and 2 senders OEM Hat all working when removed. FREE FOR THE SHIPPING COST ships from Palmetto FL Brian

Hello All There have been a few threads about gauges so I thought I would pass this along I got tired of the $75 oil pressure senders and the expensive and hard to find original OEM AC guages. I'm replacing with Teleflex (heavy duty line) They are very similiar in look to the AC guages not...

I've got 4 AC oil pressure Guages and 3 senders All 1985 original OEM Hatt all working when removed Best of all they are free for the shipping cost Brian

Hello All We spent some of the weekend at a marina with our 61'MY. I pluged into 2 50Amp recepticles they were marked 208V that's pretty common around here since alot of the marinas are wired to 3 phase 208V. So you get 2 legs of the three phase and between those legs you get a nominal 208V and...

Hello All The insurance thread reminded me of something I wrote in 2005 on another forum thought it might be of interest --------------------------------------------------------------------------------HURICANES DON"T DESTROY BOATS MARINAS DO The recent postings by fellow listees that used...

Hello all I finally got my dink (11' AB Rib with 25 HP Merc 4 stroke) up on the boat. My Marquipt davit does not have the height required to raise high enough above the boat deck to lower the motor to run it and flush it. I'm assuming the motor should not be run when it's tilted up is that...

Teak end table with glass top. One shelf and one drawer 27.5" Long 19.5" Wide 19" High. Contructed of solid teak and teak laminate over plywood nice condition can be taken apart to pack and ship. Located in Tampa FL area $200 you pay packing and shipping Email trainman484848@aol.com for photos

This is a round top 42" table with 4 chairs. It is all solid teak (not laminate) in near perfect condition. It can be taken apart to pack and ship. Located in Tampa FL area. $600 You pay packing and shipping charges Email trainman484848@aol.com For photos

Hello All I'm in the process of re modeling the saloon on my 61' MY I would like to eliminate the floor and table lamps and replace them with some wall lamps. So I'm looking for some good quality brass wall lamps something better than the Home Depot variety. Does anyone have a source? Thanks...

My boat has a whirlpool trash compactor Maybe I've led a sheltered life but I have no idea how this thing works. Do you need special bags? Where do you get them? Do you put trash directly in the machine or bag or first acumulate it somewhere else? I'm sure some of you guys have these any help...

I just purchased a 2001 AB RIB The tubes are dirty with some kind of black crude. I tried bleach and Krud Cutter didn't touch it does anyone have a sugestion as to what might clen these thing up? Brian

I recently added an inverter to my 61' MY in order to keep up with the demand at low RPM I decided to ad an aditional 75A 32V alternator. This required building a bracket and mounting system to drive it off the crank shaft pulley. So if any of you are considering doing this I could send you...

When I was at the Miami show I saw that some of the new Hatts and some other boats had mirrors on the ceiling in the heads. I liked the look it takes away some of the closed in feeling gives it the apearance of being larger than it is. I was thinking about doing this on my 61 MY and I am...

Hello All I have a Marquipt davit on my 1985 61' MY and I'm trying to determine the capacity. Marquipt is needing a # off it which I either can't find or doesn't exist no one there seems to know where it would be. It is a pretty common unit I've seen it on some other boats. It is not hydraulic...

Jabsco/ Detroit Raw water pump Rebuilt with new stainless safe and all other wear parts Shhot me an email if you need PICS $250

Hello All I'm shopping for a dink I want a center console I was sure I would be buying a RIB. Then I came across a Triumph it's a solid Ropeylene hull looks like a rib but no pontoons. Does anyone know anything about them? Also I'm trying to determine the capacity of my Marquip davit and I...

Hello All Does anyone have a source for those brown screws used on the interior? I also need a source for headliner and any advice on instalation would be apreciated I've never done it before Brian

Hello All A couple of moths ago I asked for some advice on replacing the bimini top on my 61' MY. I got some quotes and decided to build it myself out of aluminum. Some of you were intrested in seeing the completed job so I have taken some photos. Unfortunitly they are to large to post here so...

Many years ago we did some work on a 70' steel comercial trawler this boat had only a 32V DC system with very few electrical acessories. The entire system was shot batteries charger etc all bad. What we did was replace the 8V batteries with three 12V 8D batteries and three 12V battery chargers...