Search results

I’ve got a Norpro 18kw (not sure of the year) with an Isuzu 3LD1 engine and am looking to replace the Raw Water Impeller. Would any of you have the part number and a source? I can’t seem to locate either. Thanks in advance. :)

If anyone has one of these I’m interested. Salon overhead compartment door, above chart deck on ’72 45C. 17 3/4 X 18 1/2 X 3/8

Karl, I now know what you went through when you found all of that rot under your pulpit, for I have experienced a similar horror this past weekend. :mad: I recently discovered the pump-out fitting leaking into the head after a rainstorm. So I went up on the foredeck on Sat for what I thought...

I know these were posted here some time ago. I failed to print them out for myself then and now I find myself needing the info and can’t find it in the archives. Care to re-post please? Thanks.

On my 45C, I’ve got 2 bilge pumps in my engine room, one in front of each engine. The odd thing about these is that if you lift one float switch it turns on BOTH pumps. Is this normal wiring or did the previous owner get creative with this to? :confused:

MikeP, where can I get the enamel paint that you once recommended in a thread here? I’m gonna’ spray it on with my new air brush, also your recommendation… Thanks.

Blisters finally “cured”? What do you all think of these? http://www.hotvac.com/?orig=gelp http://www.hotvac.com/testimonial/default.aspx

I’m convinced; Pre-Flights are a must… I know I should do it before I run the engines and I have been. But it sure does get old. Last Friday I dropped down in the engine room prior to starting to go through the routine and… “Hmmm, what’s that neon green stuff under the engine?” :eek: I was...

I remember reading over on Boatdiesel about a DD Tune-up kit from Snap-on. Um, what exactly to I need to run the complete tune-up...

I need a little straightening out here. :confused: As long as the wire ends are sealed, what difference does it make using tinned wire or not? I realize that the Ancor wire is marine grade, has more strands than regular wire, and has heavier insulation, but is it a must?

I’ve only used this a few times and it’s in good shape. $150.00 http://www.westmarine.com/webapp/wcs/stores/servlet/product/10001/-1/10001/50317/10001/465/430/15 It comes with these mounting accessories...

I’ve got one of these that I don’t need anymore. It’s in good shape, about one year old. I’ll let it go for $70.00. http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&productId=36299

I’m in the market for one. If you have one that you want to get rid of, please let me know.

Can any of you guys give me an idea of what I should pay for a 4 yr. old 16’ Carolina Skiff? It’s a center console with a 25 Hp Yamaha, 100 hrs. It looks new and runs new. Thanks for your help.

I’m gonna’ be pulling my exhaust components apart in the next couple of weeks (in the water) and I’m trying to figure a way to plug my exhaust outlets @ the transom. They are above the water. I’m looking to protect the boat from water intrusion in case of a storm. I’ve considered cutting a...

I know there has got to be a formula somewhere for figuring out the amount of zinc required to protect the shafts. My bottom cleaner installed 2 zincs on each shaft. He says its better but I don’t think so. Is it reasonable to assume that the zincs available from West, designed for 2” shafts...

Lately I’m getting pretty good at prepping Traveler for storms. It seems like every week I go through the drill of taking the top down and throwing extra lines on… Arleen, Cindy now this… :rolleyes: Good luck to all who will be affected by this menace. See ya’ after the storm, Greg

I’m trying to figure my AC daily load use to determine the correct size inverter for my boat. How many hours per day does a typical refrigerator actually run?

For those with 871’s “N’s” preferably. When you next run your engines, at idle, would you please take IR temp readings on your exhaust manifolds, 1 inch from the head and post the readings? This is for comparison purposes to mine. On mine I read: Port eng, Left Bank- 177-184F Port eng...