Search results

Wondering if anyone has a source for the thermostat housings and thermostats for my old Chrysler gas 426's. I'm raw water cooled and the housings are looking pretty bad. Time to replace them while I'm out of the water for the winter.

I'm having to put new props on my 1967 34ft DC this year and don't know what my WOT should be. I purchased the boat at the end of last summer and it got only limited use. I'm powered with twin 440 gassers and I'm in the process of scraping off 15 years of bottom paint so I know I've had a lot...

According to my yard the props on my 1967 34ft cruiser have reached the end of their life span. They are 22X22 1 3/8 bore, and I'm running 440 gasers. Can anyone tell me if this is the original size prop that came with the boat. Sam's couldn't tell me but they do have a new pair for 1300.00...

After cleaning out the last of the storage compartments on the 67' 34C I bought over the summer I unearthed a beautiful old chrome teardrop spot light. It's 12 inches high and the lamp is 7 inches across. It swivels and has a teardrop base with 3 mounting holes and a threaded 3/4 X 2 1/2 inch...

I'm planning to replace the fiberglass gas tanks in my 67' 34 ft DCMY before they start to breakdown with this E10 garbage. I was going to switch to alumnium but there's talk of the ethanol content going up to E20 in my area. I've been told the increase in ethanol to E20 will effect even...

I'm planning to replace the fiberglass gas tanks in my 67' 34 ft DCMY before they start to breakdown with this E10 garbage. I was going to switch to alumnium but there's talk of the ethanol content going up to E20 in my area. I've been told the increase in ethanol to E20 will effect even...

The owners manual for the 1967 34' sports cruiser I purchased this summer says the boat is 34'2" in length (not counting the swim platform), but no mention of the beam. I'm trying to get into a new marina for next summer and need to know what the beam really is. I've been told 12ft up to 13...

My recently purchased 34 ft cruiser doesn't turn over very quickly at start. The battery boxes in the engine room look big for the 2 batteries on board. It's powered by twin 440's. I know the batteries are old and probably need replacing, but does anyone know what size I should have.

My recently purchased, '67 34ft DCMY had the Crowell Steering converted to Hynautic in the early 90's (parts purchased from IMO Industries, Sarasota and installed by a local Marina). The steering is sloppy and I'd like to try to bleed the system myself. I have the original owners manual that...