Search results

Looked through the past posts and couldn't find an answer. How to remove the chrome dome lights in the heads. Also any direction of LED replacement lamps for these fixtures. Heck, how about replacing the whole rusted and pitted mess. A forty one year service life is really quite remarkable...

Seems some type of petro product finding it's way out the exhaust Either oil or fuel. How to troubleshoot?

Anybody want rent their boat for a few months to my son as a live aboard? Flying for Delta out of La Guardia, needs a place to stay. 37 years old, clean cur.

Kicking around florida for the miami boat show and was wondering if there are recommendations regards salvage yards I could check out. Going to be down there for a week or so driving around is not an issue. Thx

Trying to find house near Naples/ Cape Coral area $500k with dock for my 56 Flush Deck. Anyone know of anything?

Would like to ditch the mast and replace with an arch. Has anyone run across a salvage with one intact? I know I can have a pipe arch built, but wanted to stay with the classic design. Thoughts? mark

Admiral asked me what I want for my 66th b-day. I thought a nice hand held would be fun to play with and a good back up. Any recomendations?

Pulling down all the old vinyl to create conduits and convert lighting to LED. Thought about replacing with a woven linen, but am concerned about mildew and staining. Really no way to clean water stains once up. Have seen hard panels painted white, anybody do this? Would do main salon in...

Anyone with experience laying hardwood flooring in the salon, passageways, etc. Using the proper vapor barrier and angled nails is cupping an issue? Refitting the interior, the PO sadly painted, so I am in the process of replacing with mahogany. Latest project was to rework the curved...

Would like to ditch the mast and replace with an arch. New is prohibitively expense, so was thinking of a used/salvage. Is this a possibility or am I smoking rope?

Breakers cycled. No joy Is their a gfi in line somewhere? Salon port & stbd plugs hot Shore pwr

So these reservoirs one on each side were down to 30lbs. Pressured them up to 60lbs. I see four lines coming from each, so I assume two are for that side shifter and two are for that side throttle. Do I have that right? They are holding pressure and once boosted, shifter on starboard side...

DD 8V92TI 650hp Allison MH20 L & R Pressure was zero in the pot, Lower helm starboard shifter, no resistance to movement, no shifting. Port shifter operated correctly Charged to 30lbs. Starboard shifter started operating normally. Held for 3 days then down to 15lbs Don't see any visible...

My West Marine 1000c internal compass is stuck. Can anyone recommend a Bino repair shop? thx

My gauges need replacing and my alarm system is in-op. Was reading about analog to digital converter with NEMA or wifi outputs. So, rather than replace the originals what do you think about using the analog to digital converter, displaying gauges on a tablet or garmin display and also set the...

Replacing all in one stacked washer & dryer with separates. New install requires a separate 120v outlet. Wired 120v off one leg of the 220v thru an additional 20amp breaker. When testing with multimeter, one leg of 220 is 120v, one leg is 114v. Is this okay or is it an indication that...

In the process of refitting the interior and was planning on having Scott supply and install a Garmin Suite when the majority of the woodwork is finished. The plan is for a new radar, transducers, a digital spine for monitoring engine gauges and alarms, (my original panel is fried), display...

Was going to change out the raw water impellers but can't seem to find the receipts from the last time I did it. Is the correct impeller the Jabsco 17936-0001-P? thx mark

The galley stairs curved panel looks like it was oiled. The moldings however have a hard finish. Any clue as to what original hatteras used?

Want to replace existing overhead lights with new LED down lights. They appear to be pretty common in 10v-30v, while my system is 32v and most likely higher with the engine/gen running. Marinebeam has some 12-40v lights available, but the light temperature choices are not as good. Want...