Search results

Got this baby sendure strainer NOS. Love these things. Am contemplating putting it on genset. I’ve found they block enough light that crustaceans don’t grow inside. In your opinion, does this constitute enough of a scoop to cause the raw water circuit to fill underway? Is the raw water...

I used this to set up Lumitec programmable lights around the boat. Wanted a clear color identifier for lights and each circuit and this did that perfectly, but more than I’ll ever use. If anyone needs any, pay for the shipping and some reasonable compensation and I’ll cut whatever length you...

Pay for the shipping and they are yours, one or all.

Is it possible, or advisable, to swap the seal in the water pump in place on 871? Got a weep out the hole under pressure, no weep without pressure but either way the writing is on the wall. If the pump can remain in place it will be a whole lot less work and no worries about gear lash setting.

This is the beachcomber deck box I purchased from them a year ago but was delivered as a dock box because they no longer make the deck box in this size. It has been modified with Sagatsune handles on both sides and triangular teak feet on the four corners. Made a shelf for inside but it...

Anyone know this boat? Doesn’t appear to be a basket case but no ER photos. Certainly needs a lot of work but appears to be in one piece. Ad states 12-71 without hours listed. I think N engines weren’t available any longer by this year. Do turbos and related components age poorly just...

Maybe some Amish escaped to N.H.?

How in hell is this emergency handle for manual windlass retrieval supposed to work? The handle is female and the windlass is female and Maxwell offers no optional male/male spline adapter to be a go between. The plastic maintenance handle has a male spline but it’s not removable. If I...

Had the genset creep up in temp and good thing I was in ER as the needle was right next to the red when I caught it. Turns out some seaweed got caught up in the seacock but before the strainer. Ultimately I was able to blow it out with my fresh water flush adapter. Once it was flushed...

Every time I use this I feel good because it’s so simple to make and is entirely effective at its mission . Thought I’d pass it along. It’s a basic turnbuckle with eye ends. The eyes have been modded with heat to mimic the radius of the generator pulleys. The gen in pics is a quicksilver...

Five bronze port lites from unknown manufacturer. Came out of my 70 45C when swapped to fuller brush style during refit. The lites have been disassembled and chromed, the base is Hatteras white and all components fully intact. Dogs work fine. New gaskets and tinted grey safety glass...

I’ve posted this stuff on eBay My ‘store’ is my screen name here, BostonHatteras. There is a lot of good used and brand new electronics. Two Furuno MFD TZT12F chartplotters new in box (both sold), two AP 22 control heads ( one sold )and good rudder feedback and control box from same...

https://www.ebay.com/itm/176484689322?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=78RnBSMpQum&sssrc=4429486&ssuid=ipb9CdBbQD6&var=&widget_ver=artemis&media=COPY Saw this and thought I’d share it.

Inflatable repair two part glues! manufacturer is polymarine and this concerns both hypalon and pvc glues. Manufacturer simply says mix full jar of glue to full jar of catalyst, or one half jar to one half jar. That creates a huge amount of waste if one needs a small amount of adhesive, plus...

Just sharing a discount code I was sent and used to purchase delo 100 fives at $119. each. WMCART10 Is the code.

Here's a couple photos for reference sake of tank pick ups. The all metal is an original hatteras pick up. The plastic pick up is a bushing turned down inside to accomodate the required nipple through its body-soldered into place, a pex female threaded adapter added at bottom of nipple, and of...

https://www.siliconehose.com/ I've done business with this company now a number of times and I thought I'd pass it along. Direct sales and prompt shipping. They are manufacturers and offer usda food grade, marine exhaust, wire helix, straight hose, flex hose, bends and all manner of...

I'm exploring the possibility of installing recovery tanks on both engines. My main questions I'm yet to resolve are location, and within that physically mounting the tank. I don't see any pictures that give me any clear insight when I search online. I'm making an assumption that the hose...

Anyone have a solid understanding of the 871 cooling system when it comes to the pressurization aspect? The DD cap provides for 7 psi pressurization. My understanding of pressure in an internal combustion cooling system is that under pressurization steam pockets do not form, or are more...

Does anyone have experience with Penray online cooling system cleaner part # 200164? I’m going to change my antifreeze this week and I’m contemplating running the online cooling system cleaner in the system before I drain and flush. I do have experience with off-line cleaners which are quite...