Search results

1990 67’ cpmy https://www.ebay.com/itm/326407983738?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=zwYreCv5QX6&sssrc=4429486&ssuid=ipb9CdBbQD6&var=&widget_ver=artemis&media=COPY 100k and small galley fire. Probably sell for far less.

A couple pages from a 1974 Defender catalog I came across. When my dad got the Ray Jefferson 520 depth sounder I held my head a little higher walking past the brand new 48 uniflite, I was around 10 years old ha. We also had some version of RDF, I was told never to touch it and I never did...

New WAI 12v solenoid for 40 MT and 50 MT Delco starters. $50 & shipping

12 pair tigress anodized aluminum rod storage rings. No corrosion. Pm with offer.

If anyone wants any of these, make an offer. Used engine room intake louvers have rivets or rivet holes, a couple have minor cracks, some are factory angle cut on top to clear intake holes, some are square both ends. Clamshells are 9” top to bottom and need refinishing. Plastic clamshell...

Picture is not of my boat, just using a pic from an old 53 in boat yard as an example. I'm thinking this recess wouldn't be too difficult to retrofit to my transom. Instead of reinventing everything just use the design hatteras used on hundreds of boats. Wouldn't look redneck, plus no...

Not mine New open box SMX II Control https://www.ebay.com/itm/316082946040?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9egpgfveqek&sssrc=4429486&ssuid=ipb9CdBbQD6&var=&widget_ver=artemis&media=COPY

As part of my trim tab project I’m tackling everything that’s needed in that area, for the most part. I always swore that the packing gland bases leaked. Not a stream of water but there was always some water and never could find the source. Rudders were last repacked 25 years ago but didn’t...

Any one have a source they’ve previously used for larger size carriage bolts? Looking for 5/8x4 1/2

Anyone know the owner of this 1985 53 MY? It’s been on the hard at my marina for several years. For the first few the shrink wrap would come off in the spring, they would do a little tiny bit of work and it would be re-wrapped in the fall. The wrap didn’t come off for the last two years and...

Now that I've come to the conclusion that the existing antiquated tab system is not repairable, I have to choose a new system. The boat currently has the insta/trim style wiring to helms along with insta/trim rocker switches that are relatively new. Of course she has the pocketed fiberglass...

you got to admit, the old dingy basement chic really makes the heads pop. an overall masterful combo of airy boudoir and coal chute. 873.12 hp 8v71 engines is an impressive feat, the .12 really puts it over the top. https://www.yachtworld.com/yacht/1973-hatteras-45-8634779/

My insurance is Charter Lakes as agent and Markel as carrier. I was recently requested to self survey the boat for them. Various questions about the boat, mostly with a yes or no answer. Some pointed questions on physical updates and berthing in and out of season. Also required was digital...

A good morning chuckle here. Only defect, according to seller, is cat clawed a locker door. I’d say by the looks of one main engine and otherwise this pristine example could traverse the pacific given enough fuel. As RSmith said about the condo-ization of boats until they are given up for...

The core in flying bridge supports and cockpit side decks was pretty much wasted. Took out all rod holders, deck fills etc from side decks. Cut away microscopically thin fiberglass layer that joined flying bridge support on outer house skin from inner cockpit side skin. Used fiberglass rod...

In light of the post Timeless72 made about installing larger injectors over what the engine data plate lists, I thought it might be interesting to look into this small book I picked up some years ago. Although the specific engine and Hp that the listed injectors go into isn't made known, there...

Didn’t try to gussy up the unit one bit for the photos, sorry not sorry. It works well. Blower has a slight scraping sound at extreme low rpm, not the bearing, it rubs a tiny bit on housing. Don’t know if it’s shaded pole or not but it did work with the variable speed passport II controller...

Who says you can’t inflate your tender with an air compressor? I say you can. This tool I made works absolutely perfect for 2.8 psi tube and 11 psi floor. Variable trigger and 0-15 psi gauge.

Since it’s a slow rainy weekend in New England, I thought I’d share with you a story and some pictures that act all at once as confessional and success story. Around the beginning of September, summer of 22 the boat went up to Portsmouth, New Hampshire, and despite my best attempts of timing...

What’s worse than one free algae-x device? Two. ‘Must buy both’ haha