Search results

Starboard hour meter has not worked for long time. Took out old meter to purchase new one. Put 12v to old meter and it worked! Going back to boat to see if I'm getting 32v @ meter. If not - where do I trace To the Source. Could not find hour meter wiring on ships drawings(1987 Hatteras 58'...

In the past I've kept fuel tank's full. After the thread's about diesel fuel degrading-etc. I've decided to keep tank's half full - down to 1/8 tank or 15% of capacity. I've got mech gages- so I'm trying to get a close low end gallons@ 1/8 reading. I'm going to pull gage's and stick the...

I was reviewing your fuel polisher system. Would like to make one myself. Can not find the gulfcoast F-1 filter. Would you want to sell your unit? If not let me know where you brought the gulfcoast F-1. Thanks Russ.

I NEED A ICOM 100 for parts. If anyone has one would like to buy. Thanks Russ

Wanted "two" used three knob crusie air controls ?

I have a 32v galley maid water pump. When I ordered a new pump- RAZ MARINE insisted that I change the check valve. So I did just that. What I found out was the check valve was stuck open. I would suggest everyone should check the check valve every so often to be sure it is working. If it is...

I recently purchased a 1987 58MY. This week was removing the broken water gauge and found the strainer filter @ suction side of tank. Took apart thinking it had not been cleaned in 18 years. It was 1/3 full of pea like mineral deposits. I clean and replaced without breaking anything. Started...

My SMX ll control will only go down (@66 now) Can not get temp up! Any s uggestions before I call cruise air ? Thanks Russ

I'm trying to get from Clearwater to Carrabelle - Carrabelle to Mobile. Then up to the Ohio River. I understand the Coast Guard closed the I.C. Any thoughts when the I.C. will be open? I have plans (air travel) to leave Clearwater July 19th arriving Clarrabelle that evening. 20th-21st...

Has anyone tried to relocate the battery banks on a 53 classic with 8v71TI to the engine room? If so where? I thought about building something off the hull side supported off floor. Thanks, russ