Search results

I have a 30# tank of R12 Anyone interested. email: rwurster@royalpin.com

I have 5 year old Rolls. Did an SP gravity test and found one of the 8 volt batteries has two cells that are at the red marks. All other cells are low green or high white marks. Anything I can do to bring the red ones back?

I guess I've messed up thru the years. Never have I equalize my batteries. I have 5 year old rolls batteries. How do I do that process and would I ruin the batteries since they are so old? Thanks

Does any one know the sulfated ash content of Rotella T1 40wt . Can not find it on their tech sheet. The cost of Shell vs chevron is about $5.00 cheaper per gal. Chevron is 0.80. I have always used Chevron in the past. Thanks

Called Hatteras when they changed to PVC suction pipe. Paul Hall told me they went to PVC in 1982. Since my boat is 1987 - seems I"ve lucked out. I still wonder if there are any boats out there after 1982 that have had a suction problem?

I thought I would start a new thread for this. I have a 1987 58 MY been in fresh water most of her life. Do not have a problem yet on pump out. Thinking about changing suction tube. Being 82 i'm not sure I want to do this. Any others out there with 30 year old boats with no problems.

In master stateroom the speakers would not work right (1987 MY). Pulled them out and the foam that holds the speaker to the housing had fallen apart. You can buy these on ebay. I had tried a local company to fixed them. After six weeks I picked them up unrepaired. And brought the foam kits...

I did an expermint today on the aft stateroom galleymaid. I did not think the head was getting enough water to the bowl - therefore sucking to much air and getting air lock. I took the supply line to the galleymaid to a bucket of water (next to galleymaid) with dock hose keeping bucket full...

I have a 58my series 2. Question? The aft master BR galley maid has never worked correctly since I've brought the boat 10 years ago. Has anyone changed out the galley maid in the master bedroom and what did you change too. The other two galley maids work fine because the GM motor is...

Iv'e got 1800w 120v 15A block heaters. Can not find a replacement element. Any help out there? Thanks RUSS

I have a icom 120 does not receive - maybe need speaker. Also the 100 does not come on. FREE plus shipping.

I have a 10 year old Promatic 21 - 3 alltech 24volts series charger that charges two 12v - 8D batteries for my 24volt bow thruster. This charger went wild and cooked my new Rolls batteries. Any suggestions as to a good replacement charger.

Opened the boat today. Problem with the Cruise Air System. I have Two Raw water pumps. One serving the Salon and Guest Bedroom. The other services the Master BR , Galley, Bow BR. These do not turn on the pump when any one of the systems call for heat. The pump is fine. I changed one of the...

While winterizing the boat I noticed green corrision on two of the thru hulls. What is the cause for this and the cure. Thanks

I have a 1987- 58 MY with the orginal galleymaid fresh water system. Question: I want to replace the Square D Pressure switch with one that has a low pressure cut- off. (Square D Pressure Model fsg 2j20m4cp 20-40 psi Pumptrol.) The reason for the replacement is that when you run out of...

Changed the zincs on the 8v92. Had a problem getting one of the zincs out on the discharge side of the radiator. Had to take the casting off the radiator. There is a small 1/8 inch line of crud across the tubing in the radiator. Rest of radiator is clean. Question if I use a mild acid - will...

Was changing the zincs and noticed that a couple of them seem to have broken ends when I removed them. Question if there are small pieces in there will they self desolve or should I some how try to get them out?

From one of the other posts. I picked up where the depth would disappered. The only way to bring it back was to shut power off to the DSM. To let it reboot itself. I called Raymarine about this. They said you may have to send the unit back to put in new software. I did this thru West...

Does anyone have any Honeywell 240v thermostats for sale?

A friend gave me a poli glow kit to polish the enron. I used it on a small part of the boat. Looks real nice. I was wondering if anyone else have ever used this stuff.