Search results

I'm ready to let go. 1987 series II - 58 MY Hatteras 3500 HRS -loaded -under roof for 20 years - ohio River 325K. If intrested send private message or email [email] rwurster@royalpin.com

Where should I start. I have flow scans at main helm working OK. Does the mechanical tach pass thru the flow scans to fly bridge Or do they work independent of flow scans? I have no reading on port Tach on Fly Bridge. Where should I start.

Need to replace 4 speco SPC-40RP / 4ohms hailers. Can not find any on internet. There are lots of 8ohm units. Any help is appreciated. Russ

I'll be turning 88 next Feb. Was wondering if there are any other ANCIENTS out there. I started big boating in 1990 with a 45 foot Jefferson. Had her for 10years plus. thought I would like a different boat before I expired. Sold her and got a 53 hatt. Only had for 2 years when the marina...

Anyone out there that has readings for fuel gauges: FWD (E - )(1/4 - )(1/2- )(F- 525) AFT (E - )(1/4 - )(1/2- )(F -505) At Empty there still is 9 1/2 inches to bottom of tank. Thanks, Russ

i have a custom built Helm seat for a 53my (paid 4000.00 plus to have made). Free to anyone who wants it In Indianapolis. Also a solid door off bedroom .

Question: For anyone with a 5 foot draft. I'm in a marina on the Ohio River that has not ben maintained very well. I have a 58 MY. Problem is the mouth of marina has silted to 4 feet depth for about 50 - 75 feet. I'm not comfortable plowing thru one foot of mud. I can get out when pool...

Just found out my under sink water filter base is leaking. Can not find anywhere to get a new base for Filter CFS 517LS. original hatteras filter system. Any help would be appreciated.

If those of you are hunting a 58MY if you can wait a couple of years mine may be available. I'm 85 years old and thought it's about time to hang things up. I've had the boat for the last 15 years on the OHIO river under cover. Still do everything myself and love it. But this year I decided...

What has anyone replaced the Raystar 120 gps with? I have the Raymarine RL80C system. The existing 120 receiver is wired in to a terminal block that splits to the two stations. Thanks Russ

FYI. I have been having pressure problems. Changed breaker still would trip. My boat is an 1987 58MY. Bought a new pressure tank and installed. The old one I think was 32 years old. It is a 7 gal tank when removed after draining thank it still had 4-5 gals of water. Point being it was old...

Just had bottoms of battery boxes made. If any one wants old boxes (4) can have for freight. They need to be rebuilt. Nice project for anyone that can do fiberglass work. They are for two 8v batteries. Russ

Those who have removed boxes are they glassed down or 5200 glued down? Going to start with heat gun. Any other suggestions. Thanks

I have read the pervious posts. They all are old. Was wondering if there are any new thoughts about packings today. I plan to redo my shaft packings on 2 1/2 shafts next pull out? Thanks

I just put my spare 32 volt water pump on line. Its seems to blow the 15amp breaker some times. Called Raz Marine they said a 20 amp breaker should be used. My boat is a 1987 and the 15amp breaker seems to have worked for a lot of years. Also I have the square D M4 auto shut down with...

Anyone, Just got back from Puerto Rico. I have a home there with a 40 KW generator ( perkins diesel). The sales company says I should change oil every 200 hours. Their mechanic says every 150 hours the service manual says every 500 hours. (On my boat it changed every 100 hours.) The unit...

Searched old threads could not find where to buy new boxes for 32v -(2ea 8v batteries) any help out there?

Any one out there with 8v92 ti 650 hp? I have 1987 8v92 ti 650 hp. 3300 hrs. I would like to know what engine life could be expected. The engines have been babied i run usually around 1100 rpm. Change oil every 75 hours. Blow engine out before coming to dock. Have engine warmers on 24/7...

I just replaced my battery charger. I offer the orginal la marche model 040-30-30-32v dc 240v ac free for shipping only. Works fine. It's heavy. Indianapolis indiana. 317 696 0764 russ

I have a home made fuel polisher that is free. You pay freight . It's heavy. I'm in indianapolis, indiana 46250