Search results

I have teak covering boards around the cockpit, and the finish is in pretty rough shape. It looks like they may have been coated with a sealer of some sort, as the areas that are chipping off don't look like it's thick enough to be multiple varnish coats. I used a heat gun and scraper to get all...

I want to replace my 12 volt incandescent lights in the ER with LEDs, and am leaning toward a flood light style, but there are about a zillion of them to choose from. Has anyone done this, and are there any clear favorites as far as manufacturer or supplier?

Two, brand new in boxes. Model #RBX002278 $30 for both.

The stainless steel strip around the edge of my swim platform got mashed when I tried to move St. Augustine's new breakwater out of my way. (Note: it doesn't move) After I have the fiberglass surgeon do his thing, I want to put a black Taco rub rail around the edge instead of replacing the tiny...

I've removed one of the two fixed windows on the forward trunk cabin, and after I get it cleaned up and reseal the glass to the aluminum frame, I need to reattach it to the fiberglass. The trunk cabin has quite a bit of fore and aft curvature, and the frame needs to have some significant force...

New, in box. $20 + shipping.

Good condition, works fine, was removed to make room for Maxwell replacements. $30 + shipping.

I have the remains of an Ideal V3A capstan that I need to get out of the garage. The motor (12v) is fine, and the gearbox, although heavily rusted on the exterior, appears to be fine also. The tube that houses the main shaft is peened over at the top edge, as a result of pounding on it to get it...

I'm going to replace this unit with a Maxwell, and don't want to have this taking up room in the garage. This is a capstan only, but can be rebuilt by Ideal to include a chain gypsy. This one works fine, but I want a unit that will haul in a rope/chain splice, and Ideal doesn't have such. $1,100...

This GPS EPIRB is still functional (test button indicates proper operation) but the battery has expired, and the registration would need to be changed. The label is almost gone from weather, but new label and clear dome will be part of refurb process by McMurdo. Comes with manual release...

Thinking about getting my Ideal windlass rebuilt to add a chain gypsy (now it's just a capstan), but I'm told by the folks at Ideal that it is really a size smaller than they would install on this size boat today, and to go to the size recommended would be a pretty sizable pile of boat bucks...

My fuel gauge sender is kaput, and the way it's installed, it will be a major undertaking to remove it and replace with the same type of lever arm sender. I'm tempted to leave it in place, move to a more accessible area of the tank top, and drill a new hole, then install one of VDO's tube-type...

Anyone have a pair of AP22 control heads in good working order that they are interested in selling? If so, please let me know.

From the standpoint of average weather conditions, what would those of you who have been there, done that, consider to be the "best" months for making the crossing to and from the Bahamas?

I don't know much about the A/C systems on my boat (Cruiseair split) and don't understand most of what I do know, so I'm hoping someone can answer a question I have. I've noticed that in heating mode, the compressor unit will run, making its usual noise, and the fan will run, with the...

This came with a Garmin chart plotter I purchased, and since I'm on and will probably remain on the east coast, it is doing me no good. Card specs: VUSO21R California - Mexico V 2011 V 2.50 Price $125.00

Hoping someone can shed some light on a problem I'm having. My boat has a single, 500 gallon centerline tank, with a single fill and a single vent, both on the starboard side. Based on the amount the boat's been used,and the fuel we've added, I was thinking I probably had only about a quarter...

Simrad Simnet Multi Joiner Assembly 7 prong for adding Simrad products to a Simnet network. Simrad Part # 24006298 - $35.00 Simrad SimNet Power Cable 2M Meter with /Terminator Simrad Part # 24005902 - $20.00 Simrad Adaptor Cable Simnet To NMEA 2000 Simrad Part # 24005729 - $25.00 I...

Has anyone tried the product named Spotless Stainless? Supposed to brush it on, wait, then rinse off. Wondering if it works as well as the products that are a little more elbow-grease-intensive.