Search results

I have an original unit. There is a copper line with what I assume is a thermometer at the end. This hangs down from the 3 knob controller. The tip of it broke off and now the unit won't blow cold. Anyone know of a fix or source of replacement? I'm hoping I don't need to replace the...

Hoping for some help on ID'ing this craigslist boat- 25 footer with an 8'3 beam. I might drive to take a look at it, meanwhile the seller is trying to find the title and says its a searay(?), but I can't find any 70's-80's searay like this.

I replaced my mahogany quarter rails with pvc extrusions from Barbour Plastics years ago. I did not paint them as they match the color of my hull almost perfectly. I think I used profile R1065 as it was the closest match to my rails. Larger Hats I assume the profile would be...

I had my boat shrink wrapped this past season and had done it only once before years ago with no problem. This year the shrink wrap was not brought down below the water line and the imron paint has bubbled along both sides of the bow. So I've opened an insurance claim, but just looking for an...

Just saw this, curious if anyone knows anything on this boat- pretty sure its a series 1. Wondering what's in it for power and if they cut the keel down. https://youtu.be/fjhoQmaRYKc

Found a oil leak in my transmission at the shift linkage where it enters the transmission. Is there a seal that can be replaced from the outside? From just a few minutes of idle in and out of gear it leaked quite a few drops onto a new pad. ANyone have experience with this? Thanks,

Bow pulpit for larger size boats. Its 72" long. I bought it with the intent on installing with the Ideal windlass I'm selling (see other thread) but changed plans. It will probably need some glass work to fit your bow profile. It is not painted. It does not have a liner to cover underneath...

Price $2000.

This unit was used as a display in a store. Comes with 2 foot switches, remote switch, relays, and fuse breaker (mounted in a custom teak box), chain locker pipe, mounting hardware, and capstan rod. The only issue is the cover for the chain locker pipe is missing. $1700

My yard finally got around to removing bottom paint on my 36c and after two test sections they found lots of blister. I didn't look at it in person, so I'm going off the pics. They appear small in size and depth, but man there is a lot of them! I've read past posts so I've convinced myself...

Got started on my windlass project- removed the old Ideal pulpit/windlass combo after finding a new Ideal windlass off ebay. From the start i knew there was rot underneath the pulpit, but the extent to which it spread was a big ???. So after drilling some samples I got lucky finding only wet...

I've got to replace a throttle cable from the bridge down to port engine. Does anyone know the length of cables that are in the series 1?

It's a shot in the dark but does anyone know the dimensions of the radius of the transom and the width where the swim platform mounts on a 36c? I measured it a few years ago but can't find where I wrote it down. And want to avoid driving 4 hrs to measure. I appreciate any help!

Child and Water safety Curious if anyone has used this product or similar product: http://www.safetyturtle.com/pool-safety-products/child-pool-safety.html The wife and I are expecting our 2nd 'little boater' due in early June. Our 1st will be 2 at the start of this boating season and is sure...

Any suggestions for installing new aluminum trim around the inside of the cockpit coaming? Should I bend it as I install it? Or would it be better to make a form in the shape of the cockpit curve to bend it on? Thanks for any ideas.

I am removing an older Ideal pulpit/windlass combo off my 36C and looking for a hatteras style bow pulpit. I have looked into getting one from Slane marine but thought to check here first for a used or salvaged one. Please post or PM me if there's one out there. Thanks

I have 4-53t's and notice something that seems strange to me, but appears to be factory setup. On the opposite side of the block from the blower is an access plate- I think this is a mirror image of the blower side so the blower could be installed on either side(?) On the access plate is a...

I'm installing new fuel lines and filters for my 36c DD's and I would like to install some type of manual fuel primer after the 2nd filter. Anyone know where I could buy a manual primer?

Found this video -can anyone tell if its a Hatt? It looks like maybe a 45c? Looks like fun except no blue water over the bow. http://www.youtube.com/watch?v=gh40bETxU10&feature=related

My DD's were original green paint. Since I've got them out, I'd like to get fresh paint on them and then all new hoses and clamps. Going w/ white, what type of paint should I use, and any suggestions on ways to prep the old painted surfaces?