Search results

As Pascoe says: Hatteras 37 Convertible "Initially over priced, its unfortunate that not a lot of these smaller boats are sold. As used boats, they are a superb value and excellent performers. Lightly but well built. Short on glamour, a solid choice of a low maintenance boat for those who've...

I considered this option once that allows the queen berth inside to remain unincumbered.

Any local knowledge on this double cabin for sale in my area? Hal http://www.yachtworld.com/boats/1979/Hatteras-43-Double-Cabin-2556167/Warwick/RI/United-States

I concur. It seems logical. It is just that I have seen it the reverse. For example.

I am thinking this question is like "how do you install your toilet paper with the paper coming off the top or bottom. I have seen the ladders installed both ways. So if you are installing a transom ladder like this...

Just missed out on the Robenson autopilot. I have a pump installed on my 37C but need everthing else and need the old 12v guages for my 671TIs Hal

I have a fresh water leak on the top bunk starboard side of my 37C with tower. Sometimes big storm dry. Sometimes big storm wet 10oz or so. Outside, in the vacinity there is the midship cleat, rail stantions and one of the tower's front posts. I want to rebed but if I unscrew will a nut and...

I know it is a long shot but does anyone have the hub for the whaler cable and pulley steering system mine cracked. (The funky looking contraption under the helm thet the wire rope wraps around) Can not find a source. H

Quick anchor advice needed for a 1979 37C with tower which I think weighs in at 34,000 pounds. I apologize in advance for not simply searching old threads but I am in a bit of a hurry. My Story. I do not anchor much, preferring to rent a mooring $55 in Watch Hill, Rhode Island (Napatree) when...

1979 37C w/ 671TI covingtons. Both hour meters stopped working 6 months apart. Meters and oil pressure switches are fine. If I put a positive charge on the oil pressure switch when the engines are running the meters work. But where does the other wire that is suppose to provide the positive...

Looking for a set for the upper helm on my 37C with DD671 TI. 12 volt:Electric, Eng Temp, Oil Press, Gear Press and senders. Hal

Added pictures and scematic link. Where do you see two o-rings in the scematic? I see one on the white plastic hub. Also, my shaft seal is split. The top dark plastic piece. Is that critical to stopping the leak? Does the whole thing have to be taken apart to replace it...

Losing some fluit at the helm. I looked back at my old thread (pictures are gone) and just like Genesis said the $00.50 O-ring lasted 5 years. I am trying to remember.Are there two O-rings? Do they go one next to the other? Just under the cap? Anyone remember the size? Hal I can't remember what...

For what it is worth I bought one of these ($50 shipped): because my running gear is a mess, I am too cheap to hire a regular diver, I can not hold my breath long enough to clean the shafts and trim tabs with a straight edge putty knife and I loose 2 knots at least when they are a mess...

My fresh water guage is caput despite being nursed along for years. A new 11" mecanical is $148 from Sams. Before I make the leap are there any other options?????????? Hal

Anyone with experience on a 37C know the packing size on the 37C. The stuffing box is the type with the two bolts on the sides. Thank. Hal P.S. I ordered 3/8" for the drive shafts and it turns out the 37C uses 1/4". That stuffing box has the big nut.

I have cracked glass (and fog) on my gauges especially Batt and water but would also be interested in oil, and tranny. I also need the covington pipe 2" that runs from the raw water pump tp the intercooler on a 6-71 both sides. Thanks H

Engines ran fine durring commisioning trial this year. Changed the Jabsco impeller #17936-0001 on my 671 TIs just like I have in the past. Starboard went fine. Works. Replaced port, started up, cover plate and pump got super hot, no water. Took it apart 2x put it back together same issue. Took...

I would welcome advice. I have researched archived threads to no avail. The starboard power meter stopped working two years ago, port halfway through last season. Bought a new meter and installed it but it did not work. Gave 12 volts to both of the older meters and they run. I do not have...

I feel horrible saying this, like a traitor. I had occasion to go to the Newport boat show yesterday. It was disappointing in many respects. Many trawlers, quite a few sailboats but very few convertibles. Grady White had a single Bow Rider. Nothing from Viking. And then I saw it, right in...