Search results

For my 1979 37C. Looks like these! Hal Stonington CT

Looking for a 12 v Galley Maid Water pump as a backup. MR-12-7 12vdc. It is in a tough location and it would be easier to sub out when repair/replacement is necessary. Hal Stonington CT

Anybody have an original 12 volt Galley Maid Fresh Water pump laying around that you want to sell? Let me know; Need to rebuild mine after 2 yrs (first one lasted 30) and I'd like to have a spare. Hal Stonington CT

The other side of the bushing/seal

Appreciate some input. Background:On my 1979 37C port engine ran hot on longer trips. Came up the same but then passed 180 and then some and did not come down as fast at idle. Decided to do Genesis's Ph ospho ric clean, after I replaced the impeller. Jabsco 17936-0001-P. Had been a couple of...

I have a pump installed on my 37C but need everthing else. Need not be fancy. Set it go straight ahead, reset ect. Not much of a budget. Thanks Hal

Anybody happen to know the size? Rudder post packing Size 37C ? Hal

On the 37C I have the two bolt rudder shaft stuffing boxes that look the one here, though a little cleaner. I have not had it apart in 20 years. Nuts come off the bolts but I can not separate the pieces. Not a lot of room. I hit it with penetrant. How hard can I wack it? How much pressure can I...

I replaced my 40w/12v bulbs in the engine room, deck and staterooms with these Amazon 5w E26 LED Bulbs, 12 Volt, Warm White, Round Shape, $30 for 5. Great light, bright and 12.5% of the energy used. http://www.amazon.com/gp/product/B01080HQIA?psc=1&redirect=true&ref_=oh_aui_search_detailpage

Mine is metal, all corroded and will not spin freely. Anyone have one or two they can part with? Dial only needed. Hal

Just tried these out in lieu of my 40w bulbs in cockpit and engine room. Nice light and only 5w. Thought I would pass it on. H http://www.amazon.com/gp/product/B01080HQIA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

These old Hatts are a learning experience. Good thing Sam's is here. FWIW I have learned that this Bearing,1 3/4 X2 3/8 x 7": Fits in this Strut Recessed Port 1 3/4 ID Bearing CMC-3: All 7" of it. Given that I wonder how critical it is that I replace it immediately! H

Pictures added

Working on the running gear yesterday and noticed that a rubber sleeve from what I assume is a cutlass bearing, behind the stuffing box at the thru hull has worked back exposing 1.5" of the rubber. Does anyone have experience replacing this part? I assume it is a cutlass bearing. Is it the same...

I have the hydraulic pump plumbed in line. Never worked. Think it was a Cetrex Pilot 701. Have the head missing everything else. Nothing fancy. Hopefully cheap (two starting college next fall). Like to be able to set a course and relax on a long run. Hal

Looking for a 12 volt:Electric, for the upper helm on my 37C with DD671 TI.

1979 37C with 6-71TI Covington( I think) Belt driven alternators. 12V system. Not sure where to start. Been chasing gremlins all spring. On a cruise yesterday to check the starboard engine which was running hot ( but much better, though not perfect, after using Genesis’ phosphoric acid process)...

For my 1979 37C. Looks like these! Hal Stonington CT

Teen age daughter had a birthday overnight on the 37C last night. Everything worked. This morning no water pressure. Pump no longer accessible now that I gained 25lbs. Think it has power. Raz rebuilt @ $450. What would be an equivalent to a gallymaid water pump. Need A back-up plan in case I...

I have a pump installed. Just looking for an inexpensive system to maintain a heading. Accordingly I think I need the head, computer, fluxgate compass and rudder sensor. Thanks Hal 860-608-0765 hcalmar@aol.com or pm me.