Search results

Go Green, Go White, Go Green, Go White, Go Green, Go White How bout those Spartans! Yea Baby!!

Does anyone know the recommended fuse size for a 12 volt regulator solenoid? tx john

I can't seem to remove this turbo from the exhaust elbow. Any suggestions, I've hit it twice with PB Blaster. Thinking about prying with a pry bar but do not want to damage the turbo. Thanks for any suggestions. John

When removing oil supply lines to/from turbo, do you remove the line from the fitting or the fitting from the turbo? thanks john

I need some assistance in determining where this turbo is leaking. Is it a seal or a gasket beneath the clamp? Does this look familar to any of you? What would be my next course of action for repair? Thanks for the help! John

671TIs--The V clamp between the turbo and exhaust broke resulting in some soot in my ER. Questions: What have you guys found best to clean the soot up with? Should I use Silkolene on this joint when repairing? My blankets are 23 year old, but still look ok, should I replace or reuse? What...

I have 1985 671 TIs, I am planning on replacing injectors and inspecting air boxes. I have a couple of questions: Are interstates the best ? Vendor recommendations ? (I am in Michigan) Is it mandatory to replace the airbox gaskets and valve cover gaskets ? Is it mandatory to replace the fuel...

Does anyone happen to know Florida DD's Ft. Lauderdale 2 stroke owners class schedule dates?

Ok, got my 6-71TIs, got my mechnical oil gauges and pyrometers. Need to know location on engine for oil gauge, and where on exhaust for pyrometers(forward or aft of turbos). Do you guys know the maximum distance you can run the pyrometer leads? Thanks for the help! (Went thru withdrawal when...

I have Racor 1000FGs and would like to know if anyone has any suggestions for plumbing the bowl drains. They currently have plastic twist drains that leak - drip...drip....drip. I would like to replace them with fittings and a hose that I can use for cleaning and draining. Any suggestions or...

I have DD 671 TIs. This filter is located near the starters beneath the emergency shut offs. Is this a by pass filter? Thanks for the help!

I am attempting to upload a jpeg picture into a post using manage attachments and I keep getting errors. The file is 2megs. Is it too big? Can you guys give me some guidance here? Do I have to make the file smaller? If so, how? Tx mucho.

I current have two 8d case size batteries (1400 cca each) for my 671 TIs etc. I am considering replacing them so I do not have to have surgery every few years at replacement time. Do any of you have any suggestions as to what to replace with, size, ccas, what has worked well, how to connect...

What happened to the photo gallery? Was it discontinued?

I have DD671 Diesels and would like to install KimHS heaters with thermostats. My question is - should I go with 1500W or 750W? I am in Michigan. Does anyone have any experience with either? Will there be a significant energy cost difference? KimHS recommends 3watts per cubic inch. They do...

I have DD 671TIs and would like to install pyrometers. I am looking for recommmendations on brands/model, temp. ranges and installation procedure. Thank you

How do you attach a JPEG file to a thread response??

I have DD 671 TIs. The cover sticker says max rpm 2500 NL. I need a description of how to perform the no load test, what the test reveals, what to look for and potential adjustments to make as a result of the test. Can anyone tell me what the max rpm under load I should expect . Perhaps...

I am currently contesting a yard repair bill due to overbilling and incorrect repairs being completed. I am now in a potential lien situation that could result in an auction. Does anyone know how to handle this situation or where I can get information on how to hold off an auction while...