Search results

Has anyone upgraded their cruisair controls to the newer style LED based control head from the three knob style older mechanical controls? We were quoted quite a bit of money for this upgrade and I'm wondering if its something that we can do without a lot of work.

After looking into this more and redoing some of the wiring it appears that the voltage drop is indicative of a RE Rectifier (Bridge Rectifier aka Diode) malfunction. RPM on the other hand affects frequency .I am working on replacing the rectifier. It looks like the one we have was already...

I am working on getting our second generator running (Hasn't been used in years) and am away from the boat/manuals currently and am looking for part numbers to order. Does anyone have the following info available to share: Oil Recommended - I believe we were using Delo 400 15-40w but not...

Does anyone have guage info/curves for the dual station AC Delco gauges/senders? I have been working with ActiSense on getting support for our gauges and need a few more pieces of info. I previously cataloged the following on my (12v) gauges: Water Temp 100-220 Degrees F Duel Station...

Does anyone have the specs or a source for the small feed hose behind the galley maid toilet bowl? A couple of ours are either missing or crimped and we suspect that it's causing dry run issues. I emailed galley maid and haven't heard back, but I suspect I can get this locally easier....

Do any of you folks run additives? I have been using biobor and I am curious if there are other good additives to run. I have ran Power Service products on road diesels as well but not in the Marine environment. Also I have noticed that the Racors collect more dirt since running the additive...

I have been observing low fuel pressure on our stbd side engine at the engine filter and mildly hard starts as well as some idle surging. I am suspecting the fuel pump. Has anyone experinced similar symptoms? Also is the stbd a right hand or left hand rotation pump?

Our dual (water/off - slow- fast) 32v wiper switch has failed. Anyone have a source for these or know the part number?

Does anyone have a recommendation on how to change the transmission oil on the 12-71s? Also what is the best oil to use? I have heard that Delo 100 (engine oil) is ok to use.

Does anyone have a source/part number for the red round cylinder bulbs/lights that are on the flybridge /helm on 81' vintage? I have a number of them that are out that I would like to replace.

We have a 1981 original Kohler 20KW genset for sale out of our 61MY. The motor is in running condition and recently was rewired and the belt assembly and pulleys were replaced.The genset is still in the boat in the Seattle, WA area so we would need notice to get it shipped. Kohler Genset...

The heat sensor on our Galley Maid windlass has failed open causing the foot switches and bridge switches to stop working. Anyone have insight on what the best way to fix this issue is? It appears to be inside the motor casing so we are waiting to get back to port to tear into it.

Sams Forum, We are having an issue with our Kohler 20KW Genset which we are hoping to run down. Given that these are somewhat common generators we thought this would be a good place to ask. So far some local shops have looked at it, but they have been unable to diagnose the issue. The...