Search results

I will be changing out the hoses on two of my heads this off season. In the interim I've been using bromine tabs in the strainers on the raw water side which seems to help. I also took them out of commission and drained the raw water hose and left it for a week to dry and kill what was decaying...

Found a pic. it is just inside the forward door to the stb engine room. you are looking down in this picture. It is at the bottom of the pic, kinda dark unfortunately. This pic was from the broker.

Troubleshooting on the internet.

I made connections to both the master and guest head sinks using sharkbites and pex. Here is the thread showing what I did. I'm 99% sure the galley sink is the same copper tube. https://www.samsmarine.com/forums/showthread.php?33268-Fresh-water-leak-solved

I just bought a sailboat to compliment our '53. It had a fair amount of tannin staining. I'm not planning on hauling the boat until the end of the season but I wanted to try to clean her up a bit before then. I realize Mary Kate ON_OFF works well for this application but I didn't want to use...

Our pug loves the boat as does my daughter's pug when he comes to visit. Keeping them cool is key though. Good luck.

Solved the issue with this 9.00 item from Amazon. A little tedious pulling out the hair through the little holes but it works great.

So after making a mess in the master shower fixing the AC condensate drain, I was spraying it down. The water drains pretty slowly. My wife has been telling this for a while but as usual I wasn’t listening. Under closer examination there is a lot of hair and soap scum built up. My question is...

I just found that the aft air handler in the salon was blowing out water when the fan was cranked up. 53 MY. Clearly there must be a clog. Where do I begin look to clear it? Thanks

The PO apparently repainted the non-skid areas and didn't do a very good job. I need to put a coat or two of paint over the existing non-skid. I don't think I need to add more nonskid as they went a bit heavy I think. What is the recommended paint to recover the nonskid areas? Also, they...