Search results

I am still looking for the original style section of the swim ladder that folds down into the water and is stowed against the deck ladder when not in use for my 1973 53' Classic. I suppose some detailed photos and measurements would be ok as a pattern to make one. But was hoping to find one...

I was wondering if there are any old Ray Line spotlights laying around out there that someone has replaced with a newer unit. Mine is a Ray Line 32volt Model 733FCA. I have been in contact with Harvey about parts and they will only rebuild v/s selling parts. Anyone been through this before?? I...

I am searching for a set of Storage brackets for a set of Marquipt Stairs. They appear to be pegs on a rectangular base to store the stairs in a vertical position. There is also some sort of locking device at the top as well. Thanks

I want to replace the zincs in the cooling system of my boat. I dont remember if they are 2",3 3/8" or 3 5/8" in lenght. I do know they are 3/4 dia and 1" plug dia. Does anyone know for sure?? I have Detroit 871 T.I.'s Thanks

I have a head that will pop the breaker from time to time especially when the flush button is held in for a long period of time. I am assuming it is drawing too much voltage. Does anyone know the proper draw so I can check it with a meter??

The Hatteras 1510 club held the annual Rendezvous this past weekend in Portsmouth,Va. A total of 10 boats attended and about as many drive in/fly in members attended as well. After dealing with some rough water and some rain, the weekend weather was great. For those of you that are either not...

Just when you think a project will be simple, its not. I have a small warning light on the 110 breaker panel next to the "Battery Charger" breaker. The bulb is burned out. Just replace it right? Until you call the electrical supply houses and ask for one. Mine is a typical bayonett style base...

I have a 1973 53' and am looking for the lower section of the swim platform ladder. This is the section that folds into the water and is stored against the section of the ladder that gets you from the ptatform to the deck when not in use. Thanks Ben

Over the weekend a low oil pressure sending unit that is mounted on the interior wall of the stb engine room failed. Allowing approx 3 gallons of oil to be pumped into the bilge before I knew it was happening. The oil was contained to the area of the bilge that is inboard of the innermost engine...

I am looking to replace one of my A/C units. It is a Cruisair model WFAH-16 Has anyone been through this and can recommend a supplier? I intend to install myself. Ben Fishel

Just a friendly reminder to anyone that is interested in cruising together from the upper Chesapeake to the Rendezvous in Portsmouth in Sept. Please make your reservations early. Even if you are unsure if you can make it, it is better to reserve now and cancel later.

I thought I remember seeing a post or an advertisement about having seacocks and ball valves rebuilt v/s replacing. It would be a lot easier in my situation to rebuild since I would not have to do any replumbing. The next problem is there is no markings on the seacock telling me the...

Several Hatteras owners and myself have noticed how many Hatteras owners use the forums and are not members of the 1510 club. I would like to remind you folks what a great club the 1510 club is. I have been a member of the club for about three years now and have found the members to be the best...

For those of you that attended the Rendevous in Baltimore, you may remember it was brought up at one of the discussions that a waste management plan should be carried on board at all times. I thought someone may be able to post a sample plan on here to copy or post a link to a suitable one...

As some of you may know, Hatteras was kind enough to supply certain owners with two tickets to the show. We will not be able to attend so if anyone could use two tickets, feel free to get in touch with me and we can work out getting them to you. I don't want anything for them. I hate to see them...

Just a note to thank all of the members that were at Baltimore for helping to make it a great time! To any member that did not make it, you should make every effort to attend one. I never come any from one without learning something cool or meeting some really great folks! Ben and Tina (Size...

I am searching for either rebuild kits or rebuilt motors etc for my Trico air operated wiper motors. Over the years these were used extensively on trucks with air brakes etc. To my surprise, I called my local truck parts supply house and told them what I wanted. Only to hear a chuckle on the...

I have a 4 step ladder to install on our 53' MY. I mounted the brackets just above the air intakes because that was the only area I could through bolt them and gain acess. I am now realizing that the support that is to rest against the hull to keep the steps level falls right at the air intake...

I am in the process of refilling my cooling systems. I check the Detroit book as well as my owners manual and the capacity is not listed. If anyone knows I would appreciate knowing so I can work out the correct mix ahead of time. Thanks Ben

I have a new Onan Aqualift Generator muffler. It measures 12" tall and 12" diameter. the inlet is 1 1/2" PT and outlet is 2"PT. This is a new original style that was used on my 1973 54" MY. $90.00 plus shipping. If interested email me wndsr366@aol.com