Search results

I know this has been discussed in previous forums. But I am curious if there are any new opinions or products regarding Teak and Holly interior flooring. I have seen Plasteek installed in a Hatteras and really like the look. However I am hesitant about the 6' wide thing and having to seam it. I...

I have seen several posts for swim platforms. I have one that is not off of a Hatteras and would only be ok for a smaller Hatteras. The dimensions are 83" wide, 21"deep and 1 1/2" thick. It is a very heavy teak swim platform that is in nice shape. If anyone can use it-let me know. Thanks Ben

I have a 10' Nautica hard bottom that weighs approx 750lbs. I would like to place it on the aft deck roof of our 53'MY (1973). I have the original stationary stainless steel davit (fixed at approx 45 deg angle) Is it reasonable to think the davit and aft roof will handle the weight without add'l...

I am planning on putting a hard bottom dinghy on the aft deck roof of our 53MY. The total weight is approx 750 lbs. I have the original stainless steel fixed davit. Is the davit and roof supports sufficient to handle this?

I am looking for dinghy chocks to put a 10' Nautica hard bottom on our 53MY. I would prefer the Weaver style individual stand type chocks but will consider all. Any ideas? It looks like new ones could set me back $1,000.00 or so. I hate to go that route without knowing that this is the system I...

I have two original barrel back swivel chairs from our 1973 Motoryacht. They are blue and white striped. There are no tears but the fabric is faded and there are some stains. It may be possible to dye them instead of recovering. There is also an ottoman included. $150.00 for all. Please email...

I sent my spotlight to L.b. Harvey in Coral Gables to have new motors installed. Unfortunately, I understand David has experienced some health issues which is keeping him from repairing spotlights in a timely manner. I have since requested that they send mine back. Has anyone had any luck...

There is a later 70's vintage Pacemaker yacht in our marina that is a 55 footer. I have noticed much of the hardware, doors, etc are the same items used on our 53' Hatteras. Is anyone aware of anyone specializing in Pacemaker parts? It may be another source for obsolete items that are no longer...

What is the correct lubricant for an Allison M-20 gear? 30W or 40W non detergent??

2008 National Rendezvous Hatteras 1510 Club “Baltimore, Maryland” Join your fellow members for a 4- day weekend in Baltimore, MD! September 4 – 7, 2008 Inner Harbor East Marina and Pier V Hotel Location: Welcome to Inner Harbor East Marina, Baltimore, MD , located in...

I have air operated wipers that leak water from the motors and into the cover boxes and onto the helm. I have a water seperator located in the port engine room after the compressor and after the storage tank. I drain it often but still get water from the wiper motors. Any suggestions??

Just a few days till we see everyone in Fla for the winter cruise!! Us Northern folks cant wait for some sun fun!!

Join your fellow 1510 members for a 4-day weekend at the home of Hatteras! Dates are June 26-29, 2008 at The Seraton New Bern Hotel and Marina. Located on the scenic Trent River waterfront in the heart of historic New Bern,NC., settled in 1710. As the second oldest city in North Carolina, New...

I am looking for two sets of cast aluminum valve covers for an 871. All need to have breather ports. Thanks Ben

Looking for two 871 block heaters. I would prefer the original style that bolt on the side of the block at the water jacket v/s aftermarket hose or magnetic style. Thanks Ben

I have had a nagging noticable vibration on the Port side for a while now. So far the shafts, props have been checked and straightened. The trans coupling faces have been resurfaced and the engine aligned and the rear mounts replaced. The vibration is still there. This is a reputable yard that...

I am looking for transmission mounts for a 871. Sams is aware of what I need but doesnt have any available at this time. If you go to his parts inventory and look at a picture of part number 5130234, that is what the mount looks like. Any help would be appreciated.

I am looking for Transmission mounts. We have talked to Sams and they know what I need but dont have any avail at this time. If you go to his parts list and look at part number 5130234, that is what the mount looks like-but that mount is for a 4-53 Detroit. Thanks

Parting Out the 34' Hatteras has been going pretty well. If there is anything anyone can use, there is still some hardware and misc items available. I have a 1973 53' Classic and have found that most of the hardware etc is the same style so dont let the fact that it is a 34' fool you. Also keep...

You may have seen the thread for the free Hatteras listed here. The boat is now located in Pa and my plans are to salvage the boat for parts. Feel free to let me know your needs. There are no engines or trans. Otherwise the boat is fairly complete and unmolested. Feel free to email here or...