Search results

Does anyone have a source for the Track? Thanks for the help.

I have a 6 Person Revere Life Raft that was new in 2002. It is in a hard case and needs recertification, but never opened. i also have the cradle for mounting it to the deck. $500 Firm. It needs to go, it is in my way.

Does anyone have any tips for removing the vinyl floor? I started to peel it back and it shreds like a piece of paper. I would like to get it up in one piece if possible. Please Advise

Possibly one of you can help me. I have a 15HP Yamaha 2stroke outboard for our inflatable. I have come to believe this thing is a POS. It has appeared that it is not a hearty as the old 2 stroke outboards of the past. Ever time I take this thing out I have to do something to make it run...

Who makes the breakers that are in our Hatteras electrical pannels? as best as I can tell they are Carling E-Series. is that correct? Thanks.

We are redoing the interior and when in the Heads, I find that the pannels that control the toilet/shower/holding tank are quite dated and yellowed. They are just engraved plastic with white lettering & black background. I want to spruce this up a bit and would either like to replace these...

We are in the process of redecorating the interior. While doing this, all the lighting is getting replaced. We have used some puck lights for the AC voltage and they also can accept DC Bulbs. I want to use these, but they bulbs avaliable are only avaliable in 12V and 24V. The Puck lights use...

I am still looking at bulkhead lights. I was thinking that if I buy a 12vdc LED bulkhead light, I could step down the voltage by using a diode. I know there is a way to determine the diode size needed, but I do not know what it is. Could someone help me with this? Thanks.

I am trying to replace the very ugly harvest yellow reading lights in all the bunks. As many of you know, finding fixtures that fit 32vdc light bulbs can by difficult. If found some fixtures that use MR16 bulbs, and while they do not make an MR16 Bulb in 32vdc they do make it in 36vdc. Can...

I need some help. I went to replace my spreader lights because one had broken off. They are 500 Watt halogen floodlights that are of standardard household 120Volt AC power. The old lights were wired with only two wire boat cable without a ground. I assume this was because you would not to...

I specifically need a J300X control box for the Robertson AP300X. This control box came with many different autopilots, but I may be willing to buy any autopilot that has a J300X control box if you have one for sale. Please email me or PM me if you have one avaliable. Pat Bustle...

I have a guy who has sprayed imron quite a bit, and he has given me an estimate to paint our hull with imron while we are in the yard. I was woundering if any of you know what you paid per foot to have the hull of your boat painted. I think it's a good price, but I am not sure, so I would like...

1983 13' Boston Whaler w/ 1983 35HP Evinrude remote electric start & Trailer. The boat has a new battery, and completly new wiring. The engine has just been serviced and has a new prop that has not been in the water. I had the trailer completly rebuild and it has new springs, axle, hubs...

I had a voltage spike from an alternator and it sent my voltage somewhere above 60 volts (that was where my meter stoppes reading). It basically blew the fuse on any piece of 32v electronics that was on at the time and it also blew out any 32v lightbulbs that were on. I have had the alternator...

Do any of you all have a preferance for what to blast the bottom with? It is time to remove all the old paint, and there are a lot of different types of blasting to have done (Sand, Soda, Water). If so, let me know what you think and if you have any recomendations for people on the west coast...

While Installing some new headliner in one of my staterooms I ran into a little snag that I cant figure out how to overcome. When stapling the headliner along the wall where the doors are, there is not enough room to get a stapler between the door frame adn insert a staple along the edge. So...

We are concidering repainting the hull when we haul out in December. Right now, our color thoughts are an Ice Blue or a Light yellow. I know many of you have worked with a lot of different paints, but I just wanted to get your thoughts on Imron vs. Algrip vs. Sterling. I know the boat has...

To start, we have rebuilt both engines, and at first, everything ran fine. we had no problems for the first 25 hours. We went to the keys in July, and everything went fine on the way down, and then the engines ran great for the first 2 1/2 weeks while we were there. One day on the way in from...

First off, I have to say that I hate my onan. But on that note, now that we have the engine rebuild done we went to crank up the genny and it is giving us the same misterious problem we had last summer and never figured out. Basically, when you click the start button, you get nothing but a...

My mechanic and I were looking throug the detroit manual for the break in procedure and can not find it. Does anyone have a Detroit manual with the break in procedure, and if so, what is it?