Search results

Greetings All, Becky and I were guests on Robby and Brenda's boat some time ago and were jazzed at their helm seat setup. (we had nothing) Well I have been obsessed ever since and here is the result. A cushion is in the works for the aft side. Thanks again Robby and Bren Becky and Russ:cool:

Becky and I are finalizing putting the interior back together after a year in the yard taking care of most everything below the water line that needed TLC. Since we have owned "SLOW AN EASY" she has been smell free except for the coat closet where the switching is located for the generator...

Does anyone make fitted sheets for the Fwd V berth???? 43DC Did someone post on here about flexable AC lines? I have a leak on the stateroom side that no one seems to be able to find. Thanks! Becky and Russ:cool:

We are considering doing the main deck on our 43DC with sea deck or a similar product. Our deck needs some help as it is. We like the look and are considering DIY. Has anyone done it? How does it wear? Stains? Price? Been to the SeaDek web site and came away confused. Thanks! Becky and...

We just finished installing 300' of new anchor rode (thanks again Barry) and 38' of stainless chain. Our question is does anyone have a source to strap/tie down the chain on deck? We do not want to modify the locker cover. As always thanks! Becky and Russ:cool:

We have 2 electronics boxes on either side of the helm on the fly bridge. One is natural wood the other has been painted white. We have decided we like the wood better. What is the best way to strip the one with paint? I was going to try it where it is as I do not know how hard it is to get...

We have shucked an alternator on our 43 DC. She has J&T 6-71TI's 390 HP. 12 volt system Does any one know the part number and amperage output? The unit has NO visible outside markings. My son who works for NAPA and is the rep for alternators can't even identify it. How about sources for...

We are moving along with the final work before leaving the yard and the PO installed the battery charger incorrectly and it fried. Yard says we need a 100 amp 4 leg charger. We have 4 8D's 2 port and 2 starboard. I think the starboard bank starts the genny. Future plans call for the genny to...

RAYMARINE 41XX COMPLETE UNIT CAME WITH BOAT NOT GONNA INSTALL. MAKE ME AN OFFER!!!!!!!!!!! PLUS SHIPPING UNIT WEIGHT IS ABOUT 75 LBS.:cool:

We have a BRAND NEW 9' 6" Mercury RIB with a 15HP Mercury 4 stroke FOR SALE. 10 year warranty on boat. 5 years on the motor. Runs 25 mph with two people on board. comes with Fuel tank, lights, 12volt pump, manual pump, oars, storage bag and cover. It is assembled and has break in time only (5...

I have a complete NEW Dinghy Caddy system for sale. I bought it for our 43DC but the PO put a shorter swim platform on and it will not fit with the ladder in place. We will replace the platform at next haul out but for now I have no place to store. A neat system and the Admiral could use...

Does anyone have the prints for the helm stations on a 43DC? Ours is a 79 model with J&T 6-71TI's. I looked in the old book that came with the boat and nothing there and I have ordered a new book from Hatteras and it has not arrived yet. When I spoke to them they were not sure if that was...

The yard changed the impeller in the genset (9KW diesel ONAN). Of course it was in pieces. They were able to fish all of them out. They found the bearing for the impeller worn out also. It is an Onan part anyone have an idea how much or why it would wear out so early 435hours since new. Also...

WTB Life Raft 6 man, soft or hard cover. Prefer one that is in date but will consider all. PM me here:cool:

Greetings all, I am considering re-plumbing my sea water so that in an emergency(like Oh shit emergency) I can use the engines raw water pumps to drain the bilge.(now that's optimistic) I have seen them on several convertibles but never on a cruiser/MY. My question is if 95% of our cruising...

Before using KSA marine insurance of Charleston,SC I suggest a PM to me for details of my "experience" with them.:cool: And Kudos to Mike Carbone of seaworthy who is an absolute professional!:cool:

So we go to the PB boat show and buy a RIB. Then we let it sit in the crate for two months. Last week we get the bright idea to get it out of the box and play with it at the lake. All looked to be well as we were unpacking it. Unpacked the pump and went to pumping. It's two days later and we...

One of the stuffing boxes bit the dust so We are replacing both. Anyone heard of PSS shaft seals? How about some advice on what is available and what has worked for you. I am not a fan of dripless. They just look like a problem looking for a place to happen. Tell me I am Crazy.:cool:

We have been looking for a helm base for our baby for about 6 months with no luck. We saw the perfect one when visiting Robby and Brenda so now we are in the process of having a copy of that helm base made because we can't find one like it. (Thanks Robby and Brenda for the pics and...