Search results

Does anyone know if these 32 volt Walbros that are used for engine priming and filter priming in our Hat's are rebuildable?? They evidently are not available anymore in 32v only 24 volt. I suppose I could go with the 24 v and rewire but I'd rrather rebuild the old one and use the original...

I am thinking of buying a center console in the 17-20 foot range to use a tender for my 61 CMY. Anyone towing a center console with thier Hatt? We have a 13 BW on deck which is great but in any chop ,combine the flat bottom and fact you have to sit down and get pounded to death,so we were...

Well, I had the boat hauled for normal bottom job, stab seals etc and decided to have the props redone to add pitch ,since we do not run fast anymore . Anyone that doesn't understand should refer to Brian DeGulis' thread at...

Should the current on either side of a breaker be the same ? I've got a two big DC breakers that control the current to my two inverters. On the batt'y side (before the breaker) I have E meters they are showing different current into and from the batt's , I checked with the amp probe and it...

Anyone have a source for Lifeline Batteries?? I need 8 ,8D's ...........Pat

Where do you get new curved plastic windows for a 61' cmy, I want to replace one of mine ?? What should the new window be bedded with? Do you use the shims in the plastic windows??..........Pat

Anyone know who has the least expensive fuel in the LI Sound /Cape Cod area. We are cruising and will need fuel soon . Right now we're in Martha's Vineyard. Plan is to head back south by going back to Block,stop in Branford and down the East river. We have gotten fuel in Falmouth before ,but...

I am re-plumbing the A/S and air box drains . I know that Karl said you can use one air box check valve for both sides of a "vee" engine,question is can I also only use one A/S check valve,plumbed like the Air box check valve??? I hope to go get the parts and get this buttoned up soon , It's hot...

My contract is up on my less than great Cingular /ATT cell card. . I was paying about 80.00 /month on it for unlimited access. ATT is telling me that thier new technology is so much better and it will solve all my problems ,I of course am a bit skeptical as they want another 2 year contract at...

I've got 4 ,8-Ds (AGM) under my aft master stateroom bed that make up one bank of my inverter system. The other morning we woke up to a rotten egg stink after the generator was on and the inverter system was charging. I traced it to the batt'y box under the bed. Went thru 4-5 more charge...

Am I asking for crevice corrosion problems if I set new SS bolts in epoxy. I am replacing some bolts on my swim platform and need to epoxy the old holes because the diameter is too big. I could fill the holes with West let set and then drill them for the new bolts or I was thinking of setting...

I was wondering if anyone has a source for a new microphone plug for my Icom 700 Pro SSB radio. I had a little mishap (understatement) which seperated the brass from the cord and it has one of those molded on ends which a mere mortal could never penetrate. Icom of course wants to sell me a new...

Guardian G-37, made by Fortress, main shank has very slight bend from difficult retreival, not bent off axis just bent up but shank is straight R/L,disassembles like Fortress........................................80.00,OBO. Pair of bronze props ,just out of the prop shop ,3 blade ,marked...

Does anyone know how the actuator arm attatches to the output shaft of the wiper motor. I thought that the motor was trashed but found that the shaft that goes from the inside to the outside has snapped off. It appears to have a nylon bushing on it but I can not see it to know how it comes off...

Hey guys, I need some help. I am in Utah and the marina just called and said I had an alarm going off. They said it was the third one from the right on the top. I think it is the a/c current but I'm not sure. I am a 4 hour flight and 3 hour car drive from the boat . If some one could tell me...

Hey guys , Any marinas in the Cold Spring to Northport area that you'd recommend? I'm looking for a place that has a pool ,possibly a town nearby. Also I need to set up transportation to go to a CE course. Are there cabs available or do I need to figure out how to rent a car from the marina...

Anyone have a source for an oil pressure sender. This is for shutdown in case oil pressure drops. The one that was in there is marked TR,431,0.2,P1.0. It is steel with 1/8" npt thread and bakelite center . Wiring goes to the center. I believe it is a normally open switch as I disconnected it...

Got to the boat tonight and found that ever so lovely stink of battery in the stb engine room. Batteries were hot about 110-120 degrees , charger was hot and running,batts are very low on water. Charger is a relatively new Pro Mariner 32v/220 v input. shut down charger and watered batts ,each...

How do you detect exhaust leaks? Can you spray soapy water on them and see if you get bubbles? I have heard alot of talk about the OEM monel getting pitted from the inside. How do you know if you have a problem?

How is FII to go in/out of ? I am considering running outside from Block and going into the FII to hang for a couple days on the way back from New England to the Ches. Bay. Any firsthand expirience would be appreciated. My boat is a 61' CPMY...................................................Pat