Search results

I learned something today and I thought I would pass it on even though many of you may know it. WHen I bought the boat last year, the steering ram was leaking and the system would not hold air pressure. I had the local Hynautic shop rebuild the ram and after installing, everything worked fine...

Last photo

More photos

I'm cleaning house and selling everything fishing related. Please review the following and it goes as a package for $800. 9/0 Penn Senator reel with 80# test line on a Penn Special Senator rod 9/0 - 6' 6" 20 Penn International reel with 30# test line on custom made rod with 8 eyes designed...

I frequently walk the docks in Fernandina Beach FL and saw this beauty docked on Wednesday. Here is a very interesting story about this boat and design & construction, especially using carbon fiber...

I have a GM windlass wrench that is free to anyone who wants to pay for shipping. Picture below.

I was viewing a live web cam showing Port Everglades entrance and a very nice looking 53/58 Yachtfish passed by heading in. The link is below if you're interested. You can also select Miami, Cape Canaveral and New York harbor. The Port Everglades lets you select 3 different views. Nice to...

I have a set of sea stairs with 7 steps, Railing and wheels. Great condition and rubber on wheels almost new. Just replaced most of the non-skid on the steps. These were used on my boat and I now have another set and these need to get out of my garage. Price is $475 plus cost of shipping or...

Woke up this morning to water in the master SR & closet and after tracing the source, found the leak originated at the fridge/icemaker combo on the aft deck. I've noticed that the unit has not been keeping as cold as it should and just yesterday, no ice was produced. I removed it this morning...

When I crank the port engine cold (8v92TA with 1100 hrs), I get a big cloud and then it goes away in about 5-10 seconds. It is definitely fuel smoke from the smell and I can see a small fuel film in the water for about 30 seconds. I talked to my diesel guy and he thinks it may be an...

This morning was prep day here in the Jacksonville area. With TS Beryl approaching, it was time to double up on the lines and add extra fenders to the boat. Latest prediction is sustained 65 mph winds and 3-6" of rain and 1-3' of higher tide surge. High tide is around midnight when the main...

I've been pumping up my steering until I brought the boat back to the marina and it's time to get it fixed. I have fluid leaking around the cylinder and now need to rebuild. It seems straightforward in removing the cylinder, but before I start, I wanted to get some feedback from anyone who has...

I always leave the clock set on my microwave so that when I'm away, I'll know if dock power has been off or briefly interrupted. However, I don't know how long the power has been off. Does anyone know of a product that will measure how long the power is actually off. I've had no success...

I know someone has come up with a great product or solution for cleaning windows and getting them spot free. I've tried many things, but can never seem to get all the spots and streaks out. Any suggestions would be appreciated.

At the top of my rudder posts where it comes through the hull, there are two threaded studs and a nut on each to tighten down the housing. My surveyor recommended that the nuts be tightened down to stop a very slow seepage of water. One nut moves fine and the other seems frozen to the stud...

Anyone know of any deals on a 6-step boarding stair--either Tracy or Marquipt? I checked Sailor Sam but they only have a set with wood steps. Thanks.

Our first Hatteras after 40 years of many other brands. So smooth...

Our first Hatteras after 40 years of many other brands. So smooth...

We are the proud owners of our first Hatteras and we are in the process of learning all of the systems. My question is regarding the fuel tanks. I have 4 separate tanks with the switching valves and was wondering if you can switch to a different tank while underway or do the engines need to be...