Freshwater pump on my 1988 38c is not turning off. Think bad pressure switch. Currently a shurflo 2088-423-344Some searching I did said best replacement is jabsco 31395-0092. Is this correct or any other suggestions.
Had to rebuild my helm pump on my 88 38c. Single station helm and replace the lines by the piston. I’m having issues bleeding the system and can’t seem to get the project finished. What are steps and advice.
I need to rebuild the hynautic pump on my 1988 38c. I removed the lines from the pump, I cannot get the center out of the steering wheel to remove the wheel. Any tricks to this?
The original onboard battery charger in my 1988 38c seems to be at end of life. It keeps overcharging and cooking my 2 8d batteries. What’s a good replacement
Dealing with an overconsumption issue, and managed to run out of fuel on the way home fro. The canyon yesterday. Interestingly, first lost starboard motor, then port generator stayed running even under tow. Was told generator pickup should be highest and I should’ve lost that before the...
My salon ac control has always slightly had a mind of its own. Now it doesn’t want to let me lower temp and is only raising temp and blowing heat. Any suggestions on what to check or anyone have a spare controller to sell?
I’m looking to mount another furuno navnet3d screen under the back of the bridge to view the fish finder from the cockpit on my 88 38c. Navpods will do the trick but it’s as much as a used screen. Any alternatives?
I had a bumper pop in last mondays storm while I wasn’t able to access the marina, and lost about 18” of the rubrail on the port side of my 38c. Anyone have a scrap piece around that I can try and blend in a piece?
Finally had my mechanic out on the boat yesterday, as
I have been having an Issue where the boat will run great then appear to bog.
He discovered I am not hitting no load rpm on the starboard motor an have a lot o crank case blow by. he is going to take the boat Monday to start working on...
Boat ran great until went to go shark fishing today, couldn't get above 2000 rpm, changed fuel filters no difference. Anyone ha e any suggestions what to look for next
Just summarized my fresh water system and the bottom of my hot water heater seems to have rotted out. Best replacement and how do you get the thing out and in, doesn’t look like much room
Need to replace the props on my 38c, as it turns out the boy has had the wrong size props since I bought it. Was given options in 3 and 4 blade. Anyone have recommendations one O’Leary or another, the wrong size ones were 4 blade
My starboard turbo seems to have gone bad on my 1988 38c. My mechanic is telling me these turbos are getting harder to get. Anyone have one or a good source?
Hi all, looking to add underwater lights to my 1988 38C was looking at the lumitec seablaze Quattro's and the full spectrum lumishures. and one have experience with either and can recommend.
My rub rail on the forward port side of my 88 38c got damaged last night by boat being alammed into a pole while docked. All the screws in the area came out. What is the proper way to repair
1988 38c with 485hp 671 tib's. Boat will not go above about 2250rpm at wot both 26th the glendennig engage or both throttles at the pins, feels like there it's no further pull on the cables at the end of the throttle range, any ideas what to look at
Just got a call from my yard, they went to start boat to get ready to do winter oil changes and stuff, and the battery on center exploded. apparently acid everywhere, torn headliner, etc. anyone ever experience something like this?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.