Sam's is your source for Hatteras and Cabo Yacht parts.

Enter a part description OR part number to search the Hatteras/Cabo parts catalog:

Email Sam's or call 1-800-678-9230 to order parts.

whoover's latest activity

  • W
    whoover replied to the thread Fuel hose replacement.
    Do you have an Industrial Hose and Hydraulics around you anywhere. Those people have adapters right on the shelf that should convert...
  • W
    whoover replied to the thread Fuzzies again.
    The thing about redoing the fuzzies before they rot to much is it is easier to remove. I found that part to be the most time consuming...
  • W
    whoover replied to the thread Ethical Question.
    I once had a 30' boat in a 48' slip in preparation to buying a larger boat. The marina charged me for the longer slip, not my boat...
  • W
    whoover replied to the thread 48 Yachtfish main helm station wiring access - Hynautic hose leak.
    Once the air pressure is released the oil will not spurt out, just some oil from gravity. There may be an o ring inside the steering...
  • W
    whoover replied to the thread Tower floor coating.
    Could that be the Soft Sand non skid that gets added to paint. Or maybe Kiwi Grip. Walt Hoover
  • W
    whoover replied to the thread Engine Alignment Question.
    If my memory serves me from my power transmission millwright days it looks like the front of the engine needs to move .003" to the left...
  • W
    whoover replied to the thread 48 Yachtfish main helm station wiring access - Hynautic hose leak.
    My oil pressure gauges were electric but my gear pressure gauges had a length of flexible hose like yours from the hard copper. It might...
  • W
    whoover replied to the thread Steering Ram size 1972 48 Yachtfish.
    I installed a type 3 pump on my 42c. I installed T's into the three lines coming down from the fly bridge. I also installed ball valves...
  • W
    whoover replied to the thread What size ball fenders/buoy for 53’.
    I went on a trip where I had to go through alot of locks, the balls worked perfectly for that and never had to be adjusted. The balls...
  • W
    whoover replied to the thread How to check Onan MDL4 safety shutoffs.
    I had a mdje, the sensors were wired in series and completed a circuit to the power to the fuel solenoid. When one sensor would open it...
  • W
    whoover replied to the thread Onan ring gear.
    I just looked closer at the pics, it is different than the one I had. I had straight cut teeth. Walt Hoover
  • W
    whoover replied to the thread Onan ring gear.
    In a pinch you can remove it and turn it around to the not worn side. Also try Ess-Kay on lake onieda NY answer Onan parts.com. Did you...
Show older items
Back
Top Bottom