Recent content by Gina Marie

Currently have a 45 SF would like to add the Boston whaler defiance. Not many on line just two on Yacht world. If anyone is selling one or knows of anyone would appreciate then lead. I can be reached at tom@saltarmour.com. Thanks Tom

Would like to hear from the forum as to their thoughts or recommendations in replacing both my A/C compressors and blower units. 45 Convertible 1987 1 Salon :Compressor only 16000 BTU the evaporator with blower was replaced a few month ago 2 Staterooms: 16000 BTU Compressor with a 10000 BTU...

Is it normal I have two central A/C with one water pump. I normally never run just one a/c but the other day I turned on just the staterooms which have two blowers forward and mid in the master. The water pump did not go on. When i turn on the salon the water pump is on. Normal?? Thanks

Has anyone replaced the blower motor in the salon a/c unit. Mined failed. How do I get to it do I have to disassemble the cabinet it is in?

I am just doing my annual flush and fill on 6v92 in south florida. Been reading alot on past thread concerning DD specifications. Are there recommendations as to what to flush the fresh water side of these DD with. As to filling these DD what would be the recommendation, should I use...

Just removed the original Bow railing on my 45C. Railing is one piece with all bow to toe rail pieces located in Boca Raton, Florida. or email americanairtite@aol.com

1987 6 v 92 i am having an over heating problem at low RPMs. I have cleaned my strainer and changed my impeller and it seems that my water flow from my exhaust is comparable to my starboard engine. My temperature is 180 degrees between 800 and 1200 rpms. But under 800 that it creeps up when i...

I had my 87 45 Hatteras C surveyed for new insurance so I thought since the boat is out lets do the bottom. I Had a marina in the keys haul her pressure clean her and prepare the bottom for painting. I used Pettit Ultima ablative antifouling bottom paint in which they supplied which I have used...

I found a rust spot under my starboard riser my mechanic indicated that if i sand it lightly then add an epoxy of some sort and keep monitoring it I can stretch out the life of the riser before I remove them. Any idea what I could use as a sealer???? Thanks Gina Marie

I currently just rebuilt a 31 Rybo Runner. I have 1 battery each for each outboard. I plan on running 3 additional batteries to run bait wells(2), all instruments, salt water and fresh water wash downs, electric kite reels (2) and all lights. We fish all day and into the night and would like to...

This past weekend in the Keys a very good friend and fellow Hatteras owner was leaving after a 3 month stay at the marina. As we helped him with his lines and headed out of the marina not more than 20 minutes later we heard coast guard calls and the his Hatteras was on fire and to make matters...

I have a 45 1987 SF. It has a Freezer locker on the Port side of the cockpit. I had this and my prep station on the Starboard side glassed in. This was done about 3 months ago and all of a sudden on the Lower inbound side on the freezer where it meets the cockpit deck I am weeping water, as it...

I am thinking about ordering a live well from a company called live well bait products which will custom make for me a 55 gal. that is constructed to fit under and around my fighting chair. It is plumbed through the pedestal. Priced at about 1300 which includes painting with awlgrip. this is...

I just sold my Boston whaler to a gentlemen in Boston, I live in Florida anyone have any suggestions how we both can be comfortable in the exchange of money and title since I sold the boat on Boat trader with no broker.

I will be purchasing a boat 31 feet in Annapolis Maryland. I need information on where I can buy a trailer triple axle used preferable if you know of any please advise Thanks Tom. americanairtite@aol.com