Has anyone tried to replace these shorepower inlet panels on their SFs?
Would like to get 2 as my boxes are fairly corroded. Fuses, inlets and conductors appear to be in serviceable condition still.
I could buy the originals, but I'd prefer something that is removable from the glass and serviceable as I may want to change out these conductors in the mid-term future.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 21
-
05-31-2020 05:47 PM #1Registered Member
- Join Date
- Sep 2016
- Posts
- 28
Replace dockside shorepower inlet panel
-
Re: Replace dockside shorepower inlet panel
The plugs are removable. You have to take the nuts off the inside to pull the plug housing out. I’d switch to stainless steel. Can I ask how long you have had the newer plastic covers on the fuse caps. I was thinking about switching mine out because they have turned yellow and have craz cracks. However if they only last one season I won’t bother.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
Re: Replace dockside shorepower inlet panel
Get rid of the damn fuses and install circuit breakers. Marinco (or Hubble) has them fitted inside a standard cover
Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
05-31-2020 07:55 PM #4
Re: Replace dockside shorepower inlet panel
If your bringing in 125/250 volt you will need 3 pole breakers. I'd have a new panel made for your boat designed to what you want not dictated by the old stuff.
If there is a place inside withing a few feet of the inlet that you can put a box and proper breakers it would be best.
I install ELCI breakers in stand alone boxes for inlet breakers all the time.Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
-
Re: Replace dockside shorepower inlet panel
What's wrong with the fuses? I've had them for 35 years and never an issue. Maybe blew one twice in the last 17 years. If you keep them lubed up with dielectric grease, they should never cause a problem. When a fuse blows, I can change it in a matter of a few minutes and get back inside in the air conditioning and finish my drink. When a breaker fails, I'm stuck until I can find a replacement and tear the whole panel apart. I think I'll keep my fuses.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
Re: Replace dockside shorepower inlet panel
First off referring to getting a drink means a drinking problem. Second off it also means that.....Sorry, lost my train of thought. Can I get that drink now?? Anyway most older hardware is better off being restored rather than being replaced with todays substandard crap. Just my opinion.
Put a new SS swim platform boarding ladder on a week ago. It is rusting already!!!! Glad it is temporary.1966 34c
1982 46 HP
-
Re: Replace dockside shorepower inlet panel
How many boats have had issues with these fuses ranging from failures and delays replacing the holders to fire. Some members here have had fires from these fuses
I ve had Inlet breakers on a number of boats I ve owned or run in the last 30 years, never had one fail. I ve had them tripped a number of times when using too much power but resetting was always a quick flick.
When I redid the electricals on my 53, I built an electrical panel just forward of the starboard pilothouse door but the stairs. I ve also moved the shore power inlet from the toe rail to the house side behind the panel. With the inlet just 6” from the panel I don’t need inlet protection, instead I can rely on the main breaker on the panel. If I had to have the inlet further away, there is no way I d be using fuses... does anybody really believes fuses are better than breakers?? If so... we d have fuses on Panels, not breakers
One more question... do you think Hatteras is using fuses on current production or Breakers ?Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
Re: Replace dockside shorepower inlet panel
The fuses and fuse holders are not what "caused" the fire. A fire was most likely caused by high resistance due to corrosion in the fuse holder or a loose terminal on the fuse holder or an improperly sized fuse. If maintained, they are no more likely to cause a fire than a breaker would be.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
Re: Replace dockside shorepower inlet panel
Last edited by Pascal; 05-31-2020 at 10:55 PM.
Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat