My '75 Hat 58 LRC has 5 "windshield windows": 3 flat-plate glass panes, and a curved plexi or Lexan window on each side. Those curved plexi/Lexan windows are pretty thick, like maybe 1/4". But they're slowly growing opaque, like a milky white, from sun exposure, I assume.
Has anyone ever located a place that makes/sells curved windshield windows? Or know of someone that makes custom replacements?
Is it possible to get curved glass windows?
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 11
Thread: Curved Side Windshields
-
06-27-2019 08:40 PM #1Registered Member
- Join Date
- Jun 2019
- Posts
- 9
Curved Side Windshields
-
-
06-27-2019 09:00 PM #3Senior Member
- Join Date
- Jan 2009
- Posts
- 367
Re: Curved Side Windshields
In the aviation world, it’s not uncommon to “polish” a plastic windshield 3-4 times over its useful life to remove surface crazing. Really nothing more than a progressively finer wetsanding, taking it down a few thousandths per event. Once a certain minimum thickness is reached, must be replaced because of reduced strength on pressurized aircraft. Afterward, windshields normally look new. Seems like it would be worth a google search??
-
06-27-2019 09:17 PM #4
Re: Curved Side Windshields
I have the same issue as well on the port side window of my 1976 58 LRC.... I will be calling Sams tomorrow.... thanks!
JD
1976 58' LRC Hull #311
"Miss Maggie"
Riviera Dunes, FL
-
06-28-2019 05:13 AM #5
Re: Curved Side Windshields
Could you please post the results of your enquiries about how to do this.
+++
1984 61MY #353 with 9' cockpit extension.
Sydney, Australia.
-
07-09-2019 01:23 PM #6
Re: Curved Side Windshields
Here is the info I got from SAMS.....
They recommend using a company called Cesany Plastics in Ft. Lauderdale, FL. You will need to remove your current windshield and send it to them to be utilized as a template for manufacturing a new window. I have not yet talked with Cesany Plastics yet as to the cost or turnaround of this service. Here is the contact info for anyone needing it before I follow up....
Cesany Plastics
165 NE 32nd Court
www.yachtwindows.com
Oakland Park, Florida 33334
954. 568.2002 office
Contact Name: AlexJD
1976 58' LRC Hull #311
"Miss Maggie"
Riviera Dunes, FL
-
Re: Curved Side Windshields
Our '84 Extended Deckhouse model has the plastic (Plexiglass?) curved windshield units on both sides.
Ours are noticeably scratched with mostly very fine scratches that are probably the result of exposure to the elements for the last 35 years.
Just yesterday I cautiously started seeing if I could improve their condition with a buffing wheel (3 1/2" diameter, sewn cloth) on a variable speed cordless drill.
After flooding off the residual dirt, I tried using the buffing wheel with some Novus #1 and saw little change. So I switched to Novus #2 and it made a huge difference!
I have not had the time to get back to it yet, but I did spot a bit over one foot square on the aft end of the starboard side, both inside and outside. I am very pleased with the result. I will probably be able to move a bit more quickly as I get to know what the window can handle.
In the attached photo, the polished part is to the right of the center of the photograph. The difference in the way the two halves of the photo look are due to the polishing of the plastic, not due to a shadow on the window or other influence. (There are some scratches in the lower right of the photo that are pretty deep. They appear to be the result of someone removing a sticker from the window. I have not attempted to mitigate them yet.)
IMG_7683.jpg
Nick1984 53' Extended Deckhouse
"Laissez Faire"
Delivered 1-1-86 (per Sam's)
Hull #CN737
Sausalito, CA
-
07-11-2019 06:28 PM #8Senior Member
- Join Date
- Apr 2005
- Posts
- 2,771
Re: Curved Side Windshields
All I can say Nick is.....WOW......
Walt
-
07-15-2019 01:08 PM #9Registered Member
- Join Date
- Oct 2018
- Posts
- 1
Re: Curved Side Windshields
Wow, what a difference! Thanks for sharing, ours are on a 1977 58 LRC look like they need replacement, but will try your method first.
-
Re: Curved Side Windshields
Did you get your LRC windows to look better or did you replace them? If replaced, may I ask the cost? Thanks